Agilent Technologies E6701A PC Setup, Windows 98 and Dhcp Address, Windows 98 and Static Address

Page 10

For other wireless appliances, change the band and channel as necessary.

3.On the Control (left) column of softkeys, press the Data Conn Type (F4) key and change it to IP Data.

4.On the Control column, press the More key until you see 2 of 2.

5.Press the DUT PDP Setup key (F2); then press the knob (PDP = Packet Data Protocol.)

6.Enter the DUT IP address as provided by your Network Administrator.

7.Press the knob to set the address.

8.Press the Close Menu (F6) key.

PC Setup

Use the instructions appropriate for the type of address (static or DHCP) and your operating system (Windows 98 or Windows 2000) below.

Windows 98 and DHCP Address

This procedure assumes your PC connects to an Ethernet Local Area Network using DHCP dynamic assignment of your PC’s IP address each time you log on.

1.Turn on your PC

2.Log in to your Network with your normal Password.

3.Log in to Windows if needed.

4.Wait until the initial Windows “wallpaper” and icons appear.

5.Turn off any running applications.

6.Open the Control Panel

7.Choose the Internet Options icon

a.Select the Connections tab

b.Select the LAN Settings box

c.In the “Automatic configuration” section, both “Automatically detect settings” and “Use automatic configuration script” must NOT be checked.

d.In the “Proxy server” section, “Use a proxy server” must be checked in most situations. If your network does not use a firewall, or if you experience connection problems, uncheck this box.

e.If you checked “Use a proxy server for your LAN”:

1.Enter your normal network proxy server (usually can be found by opening Internet Explorer and selecting Tools…Internet Options…Connections…LAN Settings). You may also need to try web- proxy and port: 8088.

Select OK, then OK again to exit the Internet Options menu

Windows 98 and Static Address

1.Turn on your PC

2.Log in to your Network with your normal Password.

3.Log in to Windows if needed.

4.Wait until the initial Windows “wallpaper” and icons appear.

5.Turn off any running applications.

6.Open the Control Panel

 Copyright 2002 Agilent Technologies.	10001810-E6701A Tutorial LAN Connection
All Rights Reserved.	Page 10 of 32	Rev. 1.2; Feb. 14, 2002

Image 10

Contents Page Table of Contents Appendix a Installing a WAP Gateway into a PC Appendix B Troubleshooting Appendix C. GlossaryAbout This Tutorial IntroductionEquipment Required for this Tutorial Normal LAN Cable Quantity Setup Test Set Setup Network SetupLAN Addresses Set the RF In/Out Amplitude Offset Set the Date and Time OptionalSet the Cell and Call Parameters Windows 98 and Dhcp Address PC SetupWindows 98 and Static Address Page Windows 2000 and Dhcp Address Set up NetworkWindows 2000 and Static Address Determine PC IP address Verify PC Settings Verify that Your Device Will Perform an Attach Set Up Your Wireless DeviceOn the WAP Settings menu, scroll to 1Primary IP Motorola Timeport phone exampleSet Data Bearer to Gprs On the WAP Settings menu, scroll to 2Primary PortSet the Device’s Primary Port Set WAPlite Gateway Address in Your DeviceSetup is now complete Product Feature Protocol Logging Product Feature Screen Image CaptureHere are some important points about the log data View the log data on the PC Save the Log to the PCLog Data Using the Test Set’s Front Panel View the saved logProduct Feature Ping Pinging the DUT the phone or wireless devicePinging an Alternate Device such as your PC on the LAN Product Feature Data Channel If your LAN does not use a firewall to access the InternetScroll to http//local/waplite.wml Motorola ExampleMotorola Timeport Example Product Feature Additional Connection Parameters To download the WAPlite software Appendix a Installing a WAP Gateway into a PCInfinite WAPLite Gateway by Captaris Inc To load the WAPlite software on your PCIf the wireless device will not attach, check that Appendix B TroubleshootingIf Bler mode measurements have problems Etsi Test Mode measurements have problems If Internet Explorer cannot access the 8960 WelcomeBER measurement errors Phone can’t access browse real Internet sitesPhone won’t transmit IP datagrams in Data Channel functions Page Appendix C. Glossary