Agilent Technologies E6701A manual

Page 11

1.Choose the Internet Options icon

2.Select the Connections tab

3.Select the LAN Settings box

4.In the “Automatic configuration” section, both “Automatically detect settings” and “Use automatic configuration script” must NOT be checked.

5.In the “Proxy server” section, “Use a proxy server” must be checked in most situations. If your network does not use a firewall, or if you experience connection problems, uncheck this box.

6.If you checked “Use a proxy server”:

Enter your normal network proxy server (usually can be found by opening Internet Explorer and selecting Tools…Internet Options…Connections…LAN Settings). You may also need to try web-proxy and port: 8088.

7.Select OK, then OK again to exit the Internet Options menu

8.Choose the Network icon

9.Select the Configuration tab

10.In the scroll box labeled “The following network components are installed:” highlight your Ethernet network device.

11.Select the Properties box

12.In the TCP/IP Properties box, select the IP Address tab

13.Select “Specify an IP address”

14.Enter the PC’s IP address as provided by your Network Administrator.

15.In the Subnet Mask: field, we recommend you set the PC’s subnet mask to

255.255.255.0

16. Select OK, then OK again to exit the Network menu

 Copyright 2002 Agilent Technologies.	10001810-E6701A Tutorial LAN Connection
All Rights Reserved.	Page 11 of 32	Rev. 1.2; Feb. 14, 2002

Image 11

Contents Page Table of Contents Appendix B Troubleshooting Appendix C. Glossary Appendix a Installing a WAP Gateway into a PCIntroduction About This TutorialEquipment Required for this Tutorial Normal LAN Cable Quantity Setup LAN Addresses Network SetupTest Set Setup Set the Cell and Call Parameters Set the Date and Time OptionalSet the RF In/Out Amplitude Offset Windows 98 and Static Address PC SetupWindows 98 and Dhcp Address Page Windows 2000 and Static Address Set up NetworkWindows 2000 and Dhcp Address Determine PC IP address Verify PC Settings Motorola Timeport phone example Set Up Your Wireless DeviceOn the WAP Settings menu, scroll to 1Primary IP Verify that Your Device Will Perform an AttachSet WAPlite Gateway Address in Your Device On the WAP Settings menu, scroll to 2Primary PortSet the Device’s Primary Port Set Data Bearer to GprsSetup is now complete Here are some important points about the log data Product Feature Screen Image CaptureProduct Feature Protocol Logging Save the Log to the PC View the log data on the PCView the saved log Log Data Using the Test Set’s Front PanelPinging the DUT the phone or wireless device Product Feature PingPinging an Alternate Device such as your PC on the LAN If your LAN does not use a firewall to access the Internet Product Feature Data ChannelMotorola Example Scroll to http//local/waplite.wmlMotorola Timeport Example Product Feature Additional Connection Parameters To load the WAPlite software on your PC Appendix a Installing a WAP Gateway into a PCInfinite WAPLite Gateway by Captaris Inc To download the WAPlite softwareIf Bler mode measurements have problems Appendix B TroubleshootingIf the wireless device will not attach, check that If Internet Explorer cannot access the 8960 Welcome Etsi Test Mode measurements have problemsPhone won’t transmit IP datagrams in Data Channel functions Phone can’t access browse real Internet sitesBER measurement errors Page Appendix C. Glossary