Agilent Technologies E6701A manual Motorola Timeport Example

Page 25

•Press the OK key

3.Scroll to one of the listed web sites or try to access one of these sites from your wireless device:

•http://thefunniest.com

•http://wap.weatheronline.co.uk/wap/city?en72785

•http://wap.yospace.com

•http://ayg.com

Motorola Timeport Example:

•Press the OK key to Go. (The phone requests data from the device at the address above).

4.Watch the Test Set display:

•At the bottom, in the Active Cell window, you can note the status will switch between PDP Active and Transferring as IP datagrams are sent back and forth between the phone and the WAPLite server on the PC.

•Note the 3 sections of the display:

•Downlink power will flash a result each time the Test Set transmits to the phone.

•Counters tracks data packets and RACH’s.

•Error Reports continuously indicate the quality of the wireless appliance links.

5.On the device’s display, look at the downloaded image and read the text on the screen.

6.If you get a “web server error”, press the phone’s OK button to go back to see the image, and quickly scroll to see the text. The WAPLite data download to the device may not always be seamless.

7.On the PC, note that the Infinite WAPLite window shows one “Active User”, and now lists some “Requests Processed”.

To log the IP datagrams while you browse the WAPLite gateway with the phone:

During a log of IP datagram transfers, the LAN cable will carry IP datagrams between the phone and the WAP gateway software running on the PC.

Simultaneously, the same LAN cable will carry the protocol logging data between the Test Set and the Internet Explorer software running on the PC.

1.On the PC, go back to the active Internet Explorer browser with the 8960 Web Control Page.

2.Select Logging Setup to change the Observation Points; select IP (only); select OK.

3.Select the Start Logging icon.

4.Reload the http://local/waplite.wml page, or select any web site address.

Watch the Test Set display; the Active Cell window will switch between PDP Active and Transferring as IP datagrams are sent back and forth between the phone and the WAPLite server on the PC.

5.Select the Stop Logging icon.

6.Examine the log data on the PC.

 Copyright 2002 Agilent Technologies.

10001810-E6701A Tutorial LAN Connection

All Rights Reserved.

Page 25 of 32

Rev. 1.2; Feb. 14, 2002

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Page Table of Contents Appendix B Troubleshooting Appendix C. Glossary Appendix a Installing a WAP Gateway into a PCIntroduction About This TutorialEquipment Required for this Tutorial Normal LAN Cable Quantity Setup Test Set Setup Network SetupLAN Addresses Set the RF In/Out Amplitude Offset Set the Date and Time OptionalSet the Cell and Call Parameters Windows 98 and Dhcp Address PC SetupWindows 98 and Static Address Page Windows 2000 and Dhcp Address Set up NetworkWindows 2000 and Static Address Determine PC IP address Verify PC Settings On the WAP Settings menu, scroll to 1Primary IP Set Up Your Wireless DeviceVerify that Your Device Will Perform an Attach Motorola Timeport phone exampleSet the Device’s Primary Port On the WAP Settings menu, scroll to 2Primary PortSet Data Bearer to Gprs Set WAPlite Gateway Address in Your DeviceSetup is now complete Product Feature Protocol Logging Product Feature Screen Image CaptureHere are some important points about the log data Save the Log to the PC View the log data on the PCView the saved log Log Data Using the Test Set’s Front PanelPinging the DUT the phone or wireless device Product Feature PingPinging an Alternate Device such as your PC on the LAN If your LAN does not use a firewall to access the Internet Product Feature Data ChannelMotorola Example Scroll to http//local/waplite.wmlMotorola Timeport Example Product Feature Additional Connection Parameters Infinite WAPLite Gateway by Captaris Inc Appendix a Installing a WAP Gateway into a PCTo download the WAPlite software To load the WAPlite software on your PCIf the wireless device will not attach, check that Appendix B TroubleshootingIf Bler mode measurements have problems If Internet Explorer cannot access the 8960 Welcome Etsi Test Mode measurements have problemsBER measurement errors Phone can’t access browse real Internet sitesPhone won’t transmit IP datagrams in Data Channel functions Page Appendix C. Glossary
Top Page Image Contents