Agilent Technologies E6701A manual Set the Device’s Primary Port, Set Data Bearer to Gprs

Page 16

e.Use the number keys to enter the PC IP address (see PC Setup above for your PC IP Address). This tells the phone where to find its primary server.

i.Use the left arrow (*) and right arrow (#) keys to move among the numbers; use the C key to clear (or delete) a number.

Note: on the Motorola Timeportphone, you must insert leading zeros so the IP address consists of 12 numbers. The decimal points between the numbers are entered automatically by the phone for this specific function.

Example:

 

If your PC IP Address =

111.222.33.4

Enter this in the phone=

111.222.033.004

Write the IP Address you entered in the phone here:

PC IP Address: _________________________________

Set the Device’s Primary Port

Not all devices have this port. This is based on the example of the Motorola Timeport phone. Set this as needed for your device.

1.On the WAP Settings menu, scroll to 2>Primary Port:

2.Press the OK key to Edit

3.Under Enter Port:, edit the number to 9201

This is the default value, and should already be in the data field.

4.Press the OK key when finished

Set Data Bearer to GPRS

This is based on the example of the Motorola Timeport phone. Set this as needed for your device.

1.Press the C key to return to the profile1 menu.

2.On the profile1 menu, scroll to 2>Data Bearer

3.Press the OK key to Edit

4.Scroll to 1>GPRS

This is the default value, and should already be in the data field.

5.Press the OK key to Edit

It is OK if the APN, Username, and Password are all blank.

6.Press the C key 3 times to return to the Browser Menu. Use the scroll key to move to the top of this menu.

Set WAPlite Gateway Address in Your Device

A WAP Gateway is used to observe WAP pages using the test set’s Data Channel feature. If you are using the Infinite WAPlite Gateway software (Installation instructions are in Appendix A), follow these steps. If not, go to the next section.

Set the phone’s browser to find the WAPLite homepage on your PC

1.Scroll to 2>Web Favourites

2.Press the OK key

 Copyright 2002 Agilent Technologies.

10001810-E6701A Tutorial LAN Connection

All Rights Reserved.

Page 16 of 32

Rev. 1.2; Feb. 14, 2002

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Page Table of Contents Appendix a Installing a WAP Gateway into a PC Appendix B Troubleshooting Appendix C. GlossaryAbout This Tutorial IntroductionEquipment Required for this Tutorial Normal LAN Cable Quantity Setup Test Set Setup Network SetupLAN Addresses Set the RF In/Out Amplitude Offset Set the Date and Time OptionalSet the Cell and Call Parameters Windows 98 and Dhcp Address PC SetupWindows 98 and Static Address Page Windows 2000 and Dhcp Address Set up NetworkWindows 2000 and Static Address Determine PC IP address Verify PC Settings Set Up Your Wireless Device On the WAP Settings menu, scroll to 1Primary IPVerify that Your Device Will Perform an Attach Motorola Timeport phone exampleOn the WAP Settings menu, scroll to 2Primary Port Set the Device’s Primary PortSet Data Bearer to Gprs Set WAPlite Gateway Address in Your DeviceSetup is now complete Product Feature Protocol Logging Product Feature Screen Image CaptureHere are some important points about the log data View the log data on the PC Save the Log to the PCLog Data Using the Test Set’s Front Panel View the saved logProduct Feature Ping Pinging the DUT the phone or wireless devicePinging an Alternate Device such as your PC on the LAN Product Feature Data Channel If your LAN does not use a firewall to access the InternetScroll to http//local/waplite.wml Motorola ExampleMotorola Timeport Example Product Feature Additional Connection Parameters Appendix a Installing a WAP Gateway into a PC Infinite WAPLite Gateway by Captaris IncTo download the WAPlite software To load the WAPlite software on your PCIf the wireless device will not attach, check that Appendix B TroubleshootingIf Bler mode measurements have problems Etsi Test Mode measurements have problems If Internet Explorer cannot access the 8960 WelcomeBER measurement errors Phone can’t access browse real Internet sitesPhone won’t transmit IP datagrams in Data Channel functions Page Appendix C. Glossary
Top Page Image Contents