Agilent Technologies E6701A manual Appendix a Installing a WAP Gateway into a PC

Page 27

Appendix A: Installing a WAP Gateway into a PC

Note: Agilent Technologies does not endorse or recommend the products listed below from various companies. We provide this information solely as a service to aid in this tutorial. Use them at your own risk. Agilent has done minimal testing with them in this application only. This information is subject to change without warning.

Infinite WAPLite Gateway (by Captaris Inc.)

For more company information: www.captaris.com

For more product information: www.infinite.com

If you want to install a 30-day free trial of the Infinite WAPLite Gateway program onto your PC, follow these instructions:

To download the WAPlite software:

1.Connect your PC to the Internet

2.On the Internet, go to http://www.infinite.com/library/libindex.html This gives you a list of software available for download from Infinite.

3.Scroll down to the “WAPLite” section.

4.Under the “Keyword” column, click on “WAPLITE” to access the download form.

5.Fill in the form, then select the “Download Now” button at the bottom of the form.A Windows file download dialogue box will appear.

6.Choose “Save this program to disk”, then select “OK”

7.Choose a file location in the “Save As” dialogue box.

8.Select “Open” to download the file.

To load the WAPlite software on your PC:

1.Find the executable file you just downloaded, then double-click on it to install it.

2.Follow the Windows installation instructions.

 Copyright 2002 Agilent Technologies.	10001810-E6701A Tutorial LAN Connection
All Rights Reserved.	Page 27 of 32	Rev. 1.2; Feb. 14, 2002

Image 27

Contents Page Table of Contents Appendix B Troubleshooting Appendix C. Glossary Appendix a Installing a WAP Gateway into a PCIntroduction About This TutorialEquipment Required for this Tutorial Normal LAN Cable Quantity Setup Network Setup Test Set SetupLAN Addresses Set the Date and Time Optional Set the RF In/Out Amplitude OffsetSet the Cell and Call Parameters PC Setup Windows 98 and Dhcp AddressWindows 98 and Static Address Page Set up Network Windows 2000 and Dhcp AddressWindows 2000 and Static Address Determine PC IP address Verify PC Settings Motorola Timeport phone example Set Up Your Wireless DeviceOn the WAP Settings menu, scroll to 1Primary IP Verify that Your Device Will Perform an AttachSet WAPlite Gateway Address in Your Device On the WAP Settings menu, scroll to 2Primary PortSet the Device’s Primary Port Set Data Bearer to GprsSetup is now complete Product Feature Screen Image Capture Product Feature Protocol LoggingHere are some important points about the log data Save the Log to the PC View the log data on the PCView the saved log Log Data Using the Test Set’s Front PanelPinging the DUT the phone or wireless device Product Feature PingPinging an Alternate Device such as your PC on the LAN If your LAN does not use a firewall to access the Internet Product Feature Data ChannelMotorola Example Scroll to http//local/waplite.wmlMotorola Timeport Example Product Feature Additional Connection Parameters To load the WAPlite software on your PC Appendix a Installing a WAP Gateway into a PCInfinite WAPLite Gateway by Captaris Inc To download the WAPlite softwareAppendix B Troubleshooting If the wireless device will not attach, check thatIf Bler mode measurements have problems If Internet Explorer cannot access the 8960 Welcome Etsi Test Mode measurements have problemsPhone can’t access browse real Internet sites BER measurement errorsPhone won’t transmit IP datagrams in Data Channel functions Page Appendix C. Glossary