Enable Routing on the Central Site Unit
The central site unit can now have IP routing
1Enter CO RO PA to display the Router Options screen.
2Toggle the IP Routing field to ENABLED using the Spacebar.
3Press [Ctrl]+[E] to submit the new setting and then enter SAVE
Save the Remote Unit Configuration
Both of the units must be correctly configured and functioning as IP routers for the new configuration of the remote unit to be saved.
1Enter REM to display the Remote Units screen on the central site unit.
2Select the remote unit entry and enter REM to establish a remote management session with the remote unit.
■If the units are successfully routing IP packets, then the Enter Password screen of the remote unit is displayed within 30 seconds.
3Enter PASSWORD (in
4Save the new configuration by entering SAVE
Close the Remote Management Session
1Enter QUIT to close the remote management session.
The Remote Units screen on the central site unit is displayed.
Cancel the Manual Call
It is important to remember that a manual call is still running from the initial connection to the remote unit. The call must be cancelled manually.
1Enter CO IS NU to display the ISDN Numbers screen.
2Select the entry for the remote site unit and enter CANC to cancel the call.
3Enter SAVE to save the new configuration.
All manual calls must be cancelled when the unit configuration is complete. A “call guillotine” operates after 60 minutes (the default