4Press [Ctrl]+[E] to submit the new setting and then enter SAVE
Configure the ISDN Autocall Table
Set up the ISDN Autocall table to associate the central site unit IP address with its name.
1Enter CO IS AUTO IP to display the ISDN IP Autocall Addresses screen.
2Enter ADD to add an entry to the ISDN IP Autocall table.
3Type the name of the central site unit in the Remote Unit field. Ensure that the name is correctly typed because this field is
Unit names are
4Type the IP address of the central site unit in the IP Address field.
5Press [Ctrl]+[E] to submit the new setting and then enter SAVE
Close the Remote Management Session
1Enter QUIT to close the remote management session.
The Remote Units screen on the central site unit is displayed.
Cancel the Manual Call
It is important to remember that a manual call is still running from the initial connection to the remote unit. The call must be cancelled manually.
1Enter CO IS NU to display the ISDN Numbers screen.
2Select the entry for the remote site unit and enter CANC to cancel the call.
3Enter SAVE to save the new configuration.
All manual calls must be cancelled when the unit configuration is complete. A “call guillotine” operates after 60 minutes (the default setting) to cancel the calls but during this time, additional, unnecessary, call charges will have accrued.