Make a manual call to the central site.
1Enter CO IS NU to display the ISDN Numbers table.
2Select the entry for the central site unit using the Arrow keys and enter CALL
This call is made to allow the unit to receive NRIP and NSAP updates being advertised by the Novell server at the central site, which are essential for the IPX Autocall table construction.
Enter CO IS AUTO IPX to monitor the construction of the IPX Autocall table. Press [Ctrl]+[V] at regular intervals to refresh the screen.
The manual call will last for approximately 90 seconds to enable the unit to receive all of the information which it requires.
3Enter CO IS NU to display the ISDN Numbers table.
4Select the entry for the central site unit and enter CANC
5Save the new configuration by entering SAVE
Nearest Server
The nearest server parameter must be enabled.
1Enter CO IS AUTO IPX to display the ISDN IPX Autocall table.
2Select the SAP entry using the Arrow keys and enter ED
3Select the BRIDGE PARAMETERS Nearest Server entry using the [Tab} key and toggle the setting to ENABLED using the Spacebar.
4Press [Ctrl]+[E] to submit the new setting and then enter SAVE
Disable NRIP/SAP Learning
RIP/SAP learning has to be disabled when the IPX Autocall table has been constructed.
1Enter CO BR PA to display the Filter Parameters screen. Toggle the Learn Novell RIP/SAP field to DISABLE using the Spacebar.
2Press [Ctrl]+[E] to submit the new setting and then enter SAVE