3Com 980-000077/002 manual Enable IPX Routing, Enable Novell RIP/SAP Learning

Page 59

Configuring a Central Site Unit for Routing IPX

5-5

Configure the ISDN Numbers Table

Set up the ISDN numbers table to associate each remote unit name with an ISDN number.

1Enter CO IS NU to display the ISDN Numbers screen.

2Enter ADD to add a new entry to the numbers table.

3Type the name of the remote unit in the Name field.

Unit names are case-sensitive and must be entered correctly.

4Type the ISDN number of the remote unit in the ISDN Number 1 field.

It is very important to remember that Novell IPX routing uses numbered links. This means that the ISDN line between this unit and a remote site represents an additional Novell network and has to be assigned a valid Novell network number.

5Type the IPX network address of the numbered link in the IPX Network field, not the IPX network address of the remote unit.

6Press [Ctrl]+[E] to submit the new setting and then enter SAVE

Enable IPX Routing

1Enter CO RO PA to display the Router Options screen.

2Toggle the IPX Routing field to ENABLED using the Spacebar.

3Press [Ctrl]+[E] to submit the new setting and then enter SAVE

Enable Novell RIP/SAP Learning

Novell RIP/SAP learning must be enabled at both ends of the link.

1Enter CO BR PA to display the Filter Parameters screen.

2Toggle the Learn Novell RIP/SAP field to ENABLE using the Spacebar.

3Press [Ctrl]+[E] to submit the new setting and then enter SAVE

The central site unit is now ready for routing the Novell IPX protocol.

Image 59

Contents Getting Connected Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Index Finding Specific Information in this Guide About this GuideList conventions that are used throughout this guide ConventionsUnit Naming Convention Management System CommandsIntroduction RequirementsLeased Lines One-to-one ConfigurationConfiguration by Telephone Bridging and IP Configuration OptionsBridging and IP Outline of Configuration Procedure Do you wish to keep IP Addresses and Isdn parameters Assign the Unit Name Configure the Ethernet PortConfigure the Isdn Network Type Configure the Isdn Numbers TableConfigure the Isdn IP Autocall Table Configuring a Remote Unit for Bridging and IPConnect to an IP Network Configuring a Unit using the Quick Configuration UtilityAssign the Unit Name, IP Address and Subnet Mask Test the Isdn Numbers and IP Autocall Tables Prior to Despatch Configuring a Remote Unit from the Central SiteConfigure the Isdn Autocall Table on the Central Site Unit Configuring the Central Site UnitConfigure the Isdn Numbers Table on the Central Site Unit Establish a Remote Management Session Configuring the Remote Site UnitConfigure the Ethernet Port Close the Remote Management Session Configure the Isdn Autocall TableCancel the Manual Call Cancelling Isdn Calls 14CHAPTER 2 Bridging and IP Routing IP Routing IP2CHAPTER 3 Routing IP Manual Configuration of a Central Site Unit for Routing IP 4CHAPTER 3 Routing IP Unnumbered links make the best use of available IP addresses Enable IP Routing Configuring a Remote Unit to Route IPConfigure IP Routing-Static Route Entries Configuring a Remote Unit to Route IP Test the IP Autocall and Isdn Numbers Tables Test the Isdn LineLondon Disable Routing on the Central Site Unit Configure the Isdn Numbers Table on the Central Site Unit 12CHAPTER 3 Routing IP Configuring the Remote Unit 14CHAPTER 3 Routing IP Enable Routing on the Remote Unit Configure IP Routing-Static Return Route EntrySave the Remote Unit Configuration Enable Routing on the Central Site UnitCancelling Calls 18CHAPTER 3 Routing IP Novell IPX Bridging Novell IPX and Bridging2CHAPTER 4 Novell IPX and Bridging Do you wish to keep IP Addresses and Isdn parameters 4CHAPTER 4 Novell IPX and Bridging Configuring a Remote Unit for Bridging and IPX Connect to a Novell Network Test the IPX Autocall Table 8CHAPTER 4 Novell IPX and Bridging Configure the Isdn Numbers Table on the Central Site Unit 10CHAPTER 4 Novell IPX and Bridging Build the IPX Autocall Table Enable NRIP/SAP LearningNearest Server Disable NRIP/SAP LearningClose the Remote Management Session 14CHAPTER 4 Novell IPX and Bridging Novell IPX Routing Novell IPX RoutingConfiguring a Central Site Unit for Routing IPX Configuring a Central Site Unit for Routing IPX 4CHAPTER 5 Novell IPX Routing Enable Novell RIP/SAP Learning Enable IPX RoutingConfiguring a Remote Unit to Route IPX Configuring a Remote Unit to Route IPX Specific Server for Get Nearest Server Responses Manual CallNo Specific Server for GNS Responses 10CHAPTER 5 Novell IPX Routing Configure the Isdn Numbers Table on the Central Site Unit 12CHAPTER 5 Novell IPX Routing Configure the Isdn Numbers Table Submitting the new setting turns IPX routing on Enter REM to display the Remote Units screen 16CHAPTER 5 Novell IPX Routing PPP Configuration for IP 6 Connections Configuring a PPP Connection Internet 4CHAPTER 6 PPP Configuration for IP Connections Index Index 10,3-12 Index