
Chapter 9 CallPilot operations 103
Enabling a software authorization code
With software authorization codes you can add more CallPilot mailboxes or options to your system. Contact your vendor if you want to trial or purchase a software authorization code.
To enable a software authorization code
Log:
QUIT RETRY OK
1Press ≤·°‹.
Enter the System Administrator mailbox number and password, and then press OK.
Admin
MBOX AA OTHR
2Press ››.
This option does not appear as a display button option.
Options admin
ADD VIEW
3Press ADD to display the system identification number or
press VIEW to view the options that are enabled on the CallPilot system.
SN: xxxxxxxxxxx
OK
Key1:
RETRYOK
Key2:
RETRYOK
Key3:
RETRYOK
<option name>
ACCEPT QUIT
Enabled
4The display shows the system identification number. Press OK.
5Enter the first eight numbers of the software authorization code and then press OK.
6Enter the second eight numbers of the software authorization code and then press OK.
7Enter the last eight numbers of the software authorization code and then press OK.
8Press ACCEPT to enable the keycode.
9The display shows that the software authorization code is enabled.
CallPilot 150 Telephone Administration Guide