About the Clid Routing Table | Nortel Networks 150, CallPilot

54 Chapter 5 Setting up the Automated Attendant

About the CLID Routing Table

Set up a CLID Table to control how calls are routed based on the Caller Identification of callers. To use a CLID Table, your incoming lines must be equipped with Caller Identification service.

If an incoming call has a CLID value that matches one of the entries in the CLID Table, the call is directed according to the CLID Routing Table rather than the Greeting Table. After the call is directed, the call disconnects or returns to the routing according to the Auto Attendant status. For more information on the Auto Attendant status refer to “Setting the Automated Attendant status” on page 96.

You can set up the CLID Routing Table to direct frequent callers to a specific extension or mailbox, CCR Tree or Greeting Table.

A CLID Routing Table can have a maximum of 100 entries. Entries correspond to a unique phone number or a range of numbers. For example, if you enter 4165960196, the system routes an incoming call from this number to a specific destination. However, if you make 416 a table entry, all incoming calls with this prefix are routed to a specific destination.

Entries in the CLID Routing Table are sorted in numerical order, from the longest number to the shortest. An incoming call is routed by the longest CLID entry that matches the calling number. For example:

Destination number	Table entry	Incoming call example

1	313	Incoming number 3148888 is compared to all of
		the table entries, and does not match any
		destination.

2	416598	Incoming number 4165981111 matches
		destination 2.

3	416	Incoming number 4169998888 matches
		destination 3.

4	5198853895	Incoming number 5198853895 matches
		destination 4.

5	519	Incoming number 5198853896 matches
		destination 5.

For the CLID Routing Table to work, your company must:

•subscribe to CLID services from your local telephone company

•have the appropriate hardware for your systems (a CI Trunk cartridge for example)

To set up a CLID Routing Table you:

•enter a phone number

•assign a destination. A destination can be a Greeting Table, mailbox, extension, CCR Tree or a node on a Tree

P0919416 03

Image 54

Nortel Networks 150, CallPilot manual About the Clid Routing Table, Destination number Table entry Incoming call example

Contents

CallPilot Telephone Administration Guide CallPilot 150 Telephone Administration Guide Contents Chapter Working with mailboxes Chapter Working with CCR Trees Chapter Troubleshooting CallPilot CallPilot features Chapter Getting started with CallPilotAbout CallPilot Call Center CallPilot optionsMessage Networking Desktop Messaging How to get help Telephone Getting started with CallPilot P0919416 Using CallPilot with a two line display telephone Chapter Using CallPilotSystem timeout Who can use CallPilot Using the dialpad To enter a character Symbols and conventions used in this guide About telephone buttons Using CallPilot P0919416 About installing mailboxes System Administrator MailboxChapter CallPilot mailboxes General Delivery Mailbox Subscriber mailboxes When to use Guest mailboxes Guest mailboxes Information mailboxes Mailbox Class of Service Class of Service features Prompt language Class of Service values Class of Service Mailbox properties Company Directory Alternate extensions Restricting outdialing To restrict outdialing Initializing a mailbox To initialize a mailbox Chapter Working with mailboxes Adding a Subscriber mailboxTo add a Subscriber mailbox Press OK Adding a Guest mailbox To add a Guest mailbox Adding an Information mailbox To add an Information mailbox Adding many mailboxes To add multiple mailboxes Press OK to end the session About mailbox passwords Incorrect password lock-out Changing a mailbox To change a mailbox Service classx Press Next Press to end the session Deleting a mailbox To delete a mailbox About Group Lists About Sending Group List messagesAbout Group List Numbers Adding a Group List To add a Group List Changing a Group List To change a Group List ADD DEL View Deleting a Group List To delete a Group List Chapter Setting up the Automated Attendant About the Automated Attendant Greeting Type Default start times Greeting Tables About Company Greetings Recording a Greeting To record a company Greeting Setting up a Greeting Table Custom prompts To set up a Greeting Table Chng DAY Next Mo nonb 600 pm Configuring line answering To configure how a line is answered Changing line configuration To change or view how a line is answered Assigning the number of rings before CallPilot answers To assign or change the number of rings Setting up Touchtone Gate To set up Touchtone Gate TT gatecustom About the Clid Routing Table Destination number Table entry Incoming call example To route a phone number To change or delete a phone number in the Clid Routing Table Chapter Custom Call Routing About Custom Call Routing Planning and designing a CCR Tree Components of a CCR TreeHome node Information Messages Sub-menus Destination types Mailbox nodesTransfer nodes Paths An example of a CCR Tree ⁄ ¤ ‹ › Custom Call Routing P0919416 Chapter Working with CCR Trees Building a CCR TreeTo build a CCR Tree Creating a Home node To create a Home node Adding nodes to the Home node Adding a Menu node To add a Menu node Save Print Quit Adding an Information node To add an Information node Press END Adding a Mailbox node To add a Mailbox node Press END Adding a Transfer node To add a Transfer to an internal extension About transfers to external numbers To add a Transfer to an external number Press Othr Press Xfer Adding special characters to an external transfer number ‹ or Paus Assigning a CCR Tree to a Greeting Table To assign a CCR Tree to a Greeting Table Testing a CCR Tree To disable a TreeDisabling a CCR Tree Deleting a CCR Tree To delete a Tree Changing a CCR Tree message Changing a Mailbox node To change a Mailbox node Changing a destination type To change a destination type Changing a Transfer node To change a Transfer node Deleting a Path To delete a Path Press to end the session Chapter Broadcast and Information messages About Broadcast messagesTo record and send a Broadcast message Norstar Voice Mail To record and send a Broadcast message CallPilot Information mailbox messages About recording an Information mailbox message Recording an Information mailbox message To record an Information mailbox message About resetting CallPilot To reset CallPilotChapter CallPilot operations Initializing CallPilot To initialize CallPilot Resetting the System Administrator password To reset the System Administrator password Operator settings Setting the Operator statusTo set the Operator status Changing the Operator password To change the Operator passwordResetting the Operator password Changing the Operator default extension To change the Operator default extensionSetting the Business Status Setting up line answering To set the Business StatusTo assign Answer Lines Setting the Automated Attendant status To change the Automated Attendant status CallPilot default system options Language availability Group List leading digit To change the Group List leading digit To enable or disable voicemail To enable or disable the Company Directory Company Directory Outdialing To designate the number of channels for outdialing To enable or disable the General Delivery Mailbox General Delivery Mailbox Enabling a software authorization code To enable a software authorization code To enable or disable External Mailbox Initialization External Mailbox Initialization Chapter Dialing Translation About Dialing TranslationHow the Dialing Translation Table works Examples of Dialing Translation Tables Input Output Network Access Setting Dialing Translation properties To set the Dialing Translation properties Building a Dialing Translation Table To build a Dialing Translation Table Reviewing entries in the Dialing Translation Table To review Dialing Translation Table entries Changing a Dialing Translation Table entry To change an entry in the Dialing Translation Table Deleting a Dialing Translation Table entry To delete an entry in the Dialing Translation Table Chapter Troubleshooting CallPilot Telephone cannot be forwarded to the system Verify the correct extension is assigned to the mailbox You cannot create a Group List CallPilot error messages Already a member Invalid key Mbox not init Not recorded Ringing lines and answer buttons Chapter CallPilot configuration tipsDelayed answering by the Automated Attendant Ringing Answer button CallPilot configuration tips How to set up CallPilot for different businesses CallPilot for a small business On Your Toes Dance StudioCentral receptionist Greeting for On Your Toes Costume Room CallPilot for a medium business Bridge Stone Engineering Customer Service and Sales department Greeting for Bridge Stone Engineering Managers Shipping and Receiving Feature Compatibility Delayed Ring Transfer DRT Language choice Service Modes CallPilot configuration tips P0919416 Chapter Default configuration values Value or range Default Default configuration values Message storage times Default configuration values P0919416 Glossary See Custom Call Routing ATA Feature code used to leave messages in CallPilot mailboxes Storage place for messages on the CallPilot system Returning CallPilot to its original default settings Push button telephone that emits Dtmf tones Glossary P0919416 Index Index Troubleshooting P0919416 Troubleshooting 113 Accessing a line or line Pool