JVC BR-HD50 manual 9CH2/4 Audio OUT terminal RCA, 0HDMI OUT Hdmi signal output termi- nal

Page 11

NAMES AND FUNCTIONS OF PARTS

Rear panel

2

1

6

7

 

4

 

 

 

 

 

3

5 8

9

0

1[VIDEO LINE IN] terminal (BNC)

4[VIDEO Y/C OUT] terminal (4-PIN)

5[COMPONENT OUT] Component sig- nal output terminal (BNC×3)

Output terminal for component video signals (Y/PB/PR). Outputs analog HD/SD video. Con- nect this to an HD-compatible monitor with a COMPONENT IN terminal.

•The video format to output from this termi- nal can be selected using OUT FORMAT [60]/[50] in the VIDEO Menu screen. (XPage 73, 74)

•It displays the Menu setting screen, Date/ Time setting screen and warning informa- tion.

•If DISPLAY in the DISPLAY Menu screen is set to “ON” or “AUTO”, information will be displayed on-screen, e.g., the operation mode, date/time and counter. (XPage 20)

9[CH2/4 AUDIO OUT] terminal (RCA)

Use this terminal to output analog audio sig- nals.

•In the 48kHz audio mode, it outputs the sound of CH2.

•The output audio channel during playback of tapes recorded in 32kHz audio mode, or the EE audio channel during DV signal input in 32kHz audio mode, can be selected using A.OUTPUT: DV in the AUDIO Menu screen. (XPage 72)

0[HDMI OUT] HDMI signal output termi- nal

Outputs HDMI signals. (HDMI : High Definition Multimedia Interface)

Outputs digital HD/SD video and digital audio. This is connected to a monitor with an HDMI

This is the input terminal for composite video signals.

•To input video via this terminal, set the INPUT SELECT switch located on the front panel to “LINE”.

2[VIDEO Y/C IN] terminal (4-PIN)

This is the input terminal for Y/C separate video signals.

•To input video via this terminal, set the INPUT SELECT switch located on the front panel to “Y/C”.

•When wide-screen ID signals are input, the wide-screen ID signal is recorded.

3[VIDEO LINE OUT] terminal (BNC)

This is the output terminal for composite video signals.

•It displays the Menu setting screen, Date/ Time setting screen and warning informa- tion.

•If DISPLAY in the DISPLAY Menu screen is set to “ON” or “AUTO”, information will be displayed on-screen, e.g., the operation mode, date/time and counter. (XPage 20)

•When the input signal or playback signal is in HDV format, this terminal outputs video that is converted down to 480i or 576i.

Select the style for displaying down-con- verted video on a monitor screen with a 4:3 aspect ratio, using DOWN CONV. MODE on the VIDEO Menu screen. (XPage 74)

This is the output terminal for Y/C separate video signals.

•It displays the Menu setting screen, Date/ Time setting screen and warning informa- tion.

•If DISPLAY in the DISPLAY Menu screen is set to “ON” or “AUTO”, information will be displayed on-screen, e.g., the operation mode, date/time and counter. (XPage 20)

•When the input signal or playback signal is in HDV format, this terminal outputs video that is converted down to 480i or 576i.

Select the style for displaying down-con- verted video on a monitor screen with a 4:3 aspect ratio, using DOWN CONV. MODE on the VIDEO Menu screen. (XPage 74)

•When tapes that have recorded wide- screen signals are played back, the wide- screen ID signal is output.

When playing back an HDV recorded tape, wide-screen ID signals are output according to the mode set using DOWN CONV. MODE in the VIDEO Menu screen.

Memo

Whether or not to enable SET UP for analog sig- nals (composite, Y/C separate and component signals) can be selected with SET UP [60]: DV in the VIDEO Menu screen (for U model only).

6[CH1 AUDIO IN] terminal (RCA)

Use this terminal to input analog audio signals. To enable audio input via this terminal, set the INPUT SELECT switch located on the front panel to “LINE” or “Y/C”.

Analog signals are recorded on CH1.

7[CH2 AUDIO IN] terminal (RCA)

Use this terminal to input analog audio signals. To enable audio input via this terminal, set the INPUT SELECT switch located on the front panel to “LINE” or “Y/C”.

Analog signals are recorded on CH2.

8[CH1/3 AUDIO OUT] terminal (RCA)

Use this terminal to output analog audio sig- nals.

•In the 48kHz audio mode, it outputs the sound of CH1.

•The output audio channel during playback of tapes recorded in 32kHz audio mode, or the EE audio channel during DV signal input in 32kHz audio mode, can be selected using A.OUTPUT: DV in the AUDIO Menu screen. (XPage 72)

terminal.

•The video format to output from this termi- nal can be selected using OUT FORMAT [60]/[50] and MONITOR SELECT in the VIDEO Menu screen. (XPage 73, 74)

•It displays the Menu setting screen, Date/ Time setting screen and warning informa- tion.

•If DISPLAY in the DISPLAY Menu screen is set to “ON” or “AUTO”, information will be displayed on-screen, e.g., the operation mode, date/time and counter. (XPage 20)

Memo

zVideo is not displayed when the connected monitor does not support the video format selected using OUT FORMAT [60]/[50] in the VIDEO Menu screen.

If this occurs, set MONITOR SELECT to HDMI[A].

zIf the monitor has a DVI-D terminal that sup- ports HDCP, you can watch digital video by connecting an HDMIλDVI-D cable.

zWhen the video format of the IEEE1394 input signal differs from the IEEE1394 switch, or INPUT SELECT switch is set to HDV/DV and a signal is not input into the IEEE1394 terminal, no signal is output from the HDMI OUT termi- nal. ("no 1394" is displayed on the counter dis- play.) Similarly, no signal is output from the HDMI OUT terminal when a blank cassette tape is played. ("-------" is displayed on the counter display.)

E-16

E-17

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Serial No LLT0088-001A For Customer UseBR-HD50HD Video Cassette Recorder BR-HD50UInformation for Canada Renseignement Pour Canada Important SafeguardsInformation RemarqueFor Continental EUROPE, ETC For U.K. only Power SystemFor Your Safety Please Read the Following Text Carefully Must be EarthedTable of Contents Cassette tape IntroductionRemarks of usage HDV and DV format „ Head cleaning Regular maintenanceCleaning tape „ Regular maintenanceNames and Functions of Parts 7COUNTER switch „ Dvcam indicator light„ 60 indicator light „ 50 indicator light„ SEARCH+/S button DHOLD button GCUE UP button EMENU button HSpecial functions/Setting buttonsFRESET button „ BLANK/P button3VIDEO Line OUT terminal BNC 0HDMI OUT Hdmi signal output termi- nal9CH2/4 Audio OUT terminal RCA 2VIDEO Y/C in terminal 4-PINESERIAL Remote terminal mini jack BDC power input terminalCDC power cord clamp DSIGNAL GND terminal„ HDV format ON-SCREEN Display„ DV format Remaining tape VCR operation modeDate/time Counter displayDisplay Description Event/Alarm displayDisplay displayed during operation Description Display displayed for about 3 seconds DescriptionConnection „ Output signal„ Input signal Digital input IEEE1394 terminal 6P Connecting audio signalsAttaching the supplied ferrite core To the DC cord. XPage „ Operate BR-HD50 with the wired remote controllerComponent OUT RECORDING/OUTPUT Signal FormatPreparation Turning on the powerTurning off the power „ Output terminal video/audio signal format during playbackEjecting the cassette tape Selecting the operating method main unit/remote controllerOperation Lock mode Loading the cassette tape„ Display Menu screen Setting date and timeSelecting date/time display On-screen status displayRecording Check settingsSetting the Menu screen Setting Menu screensTting related Menu screen Selecting input signalAdjusting audio recording level SettingsSource unit Recording index signalsPlayback Video settingsFast forward/rewind Audio settingsSettings regarding playback function Frame-advance playback Slow playback and Search mode„ In the Stop mode, press the Blank button „ Repeat Mode in the System 1/2 Menu screenIndex search Blank searchSearching cue-up points Changing cue-up pointsRegistering cue-up points Exiting the Multi Cue-up screen„ NDF/DF 60 U model only Time CodeTCG Select Regen Recording from preset dataTCG Select Preset „ Set the TC/UB/CLOCK 1/2 Menu as follows„ Remote 2/2 Menu screen Control with RS-422A Analog signalsControl with the IEEE1394 ter- minal Digital signals EditMenu screen on counter display „ Set BR-HD50 to the Stop or Still modeSetting the menus Menu Screens„ System 1/2 Menu screens TOP Menu screenSystem Menu screens „ System 2/2 Menu Remote Menu screens Video Menu Screen Audio Menu ScreenDown Conv Hdmi ModeTest Signal OUT for„ TC/UB/CLOCK 2/2 Menu screen TC/UB/CLOCK Menu screens„ TC/UB/CLOCK 1/2 Menu screen Display Menu screen „ Alarm display Displayed regardless of the Display modeOthers „ Warning display Displayed regardless of the Display mode „ Set BR-HD50 to the Stop mode „ General „ Connectors„ Accessories „ External dimensions Unit mmSupplement Important Safety Instructions„ AC adapter section
Top Page Image Contents