JVC BR-HD50 manual „ Warning display Displayed regardless of the Display mode

OTHERS

Warning display (continued)

„Warning display (Displayed regardless of the DISPLAY mode)

When a warning display appears, BR-HD50 stops operation and ceases to accept any operation command. When TAPE DEFECTIVE (5605 - 5609) is displayed, the unit similarly stops all opera- tions except EJECT operation.

Display	Status	Action
WARNING 0201	Condensation.	Leave the power on and wait for the
CONDENSATION ON		display to disappear.
DRUM
WARNING 3200	Unable to load tape.	This error can be resolved by turning
LOADING FAILURE		off and then on the power. However,
		doing so may damage the tape in
WARNING 3300	Unable to eject tape.
		some cases. Consult your JVC
UNLOADING FAILURE
		authorized dealer.
WARNING 4100	Eject error.	Is a heavy object on the unit?
CASSETTE EJECT
FAILURE
DEFECTIVE TAPE!	Broken tape.	Press the EJECT button to remove
5605 - 5609		and replace the tape.
WARNING 5702	Tape-end sensor error.	This error can be resolved by turning
TAPE END DET.		off and then off the power. However,
ERROR!		doing so may damage the tape in
		some cases. Consult your JVC
WARNING 5802	Tape-beginning sensor error.
		authorized dealer.
TAPE BEGIN DET.
ERROR!
WARNING 7001	Drum rotation error.
DRUM MOTOR
FAILURE
WARNING 7101	Capstan rotation error.
CAP MOTOR FAILURE
WARNING 7202 - 7203	Supply reel rotation error.
SUPPLY REEL
FAILURE
WARNING 7302 - 7303	Take up reel rotation error.
TAKE UP REEL
FAILURE
WARNING 7305	Tape winding error during unloading.
TAKE UP REEL
FAILURE
WARNING 7401	Reel motor rotation error.
REEL MOTOR
FAILURE

Memo

This unit uses a microcomputer. It may not function correctly if there is external noise. If this happens, please turn off the power and then on again.

OTHERS

Troubleshooting

Symptom	Action
No power.	Is the AC adapter correctly connected?
Unable to record.	Is the slide of the cassette tape turned to “REC”?
	Set it to “REC” if it is at the “SAVE” position.
The operation buttons of BR-HD50	Is OPERATION LOCK of the SYSTEM [2/2] Menu set to ON?
do not work.	Set it to OFF if the operation buttons are to be used.
	For REMOTE, select the buttons that can be operated with the
	LOCAL FUNCTION Menu.
Editing cannot be controlled even	To control with RS-422A, set REMOTE SEL 9P in the REMOTE
after the REMOTE/LOCAL switch	[1/2] Menu screen to “ON”.
is set to REMOTE.
Noise is produced on the playback	• The tape is damaged.
video.	Replace the tape.
Playback sound interrupted.	• The head is dirty.
	Clean it with the specified head-cleaning tape. (XPage 9)
Cannot play back.	Is the setting for PB TAPE FORMAT in the SYSTEM [2/2] Menu
	screen something other than AUTO?
	Playback is not available when this menu item does not match
	the tape format.
Time codes are not correctly	Is TC DUPLI.: DV in the TC/UB/CLOCK [1/2] Menu screen cor-
recorded during DV signal input.	rectly set up?
Unable to turn on the power with	Isn’t the REMOTE/LOCAL switch set to REMOTE when
the OPERATE button.	LOCAL FUNCTION in the REMOTE [1/2] Menu screen is not
	set to ALL KEYS?
SERIAL REMOTE control does not	Isn’t REMOTE SEL SER in the REMOTE [1/2] Menu screen set
function.	to OFF?
	For SERIAL REMOTE control, set it to ON or LOC+REM.
Unable to operate BR-HD50 with	• Isn’t REM SEL HDV/DV in the REMOTE [1/2] Menu screen
the IEEE1394 terminal.	set to OFF? To operate with the IEEE1394 terminal, set it to
	ON or LOC+REM.
	• When the controlling equipment (non-linear editor, etc.) does
	not recognize this unit, either reconnect the IEEE1394
	cable, or reset the power to the unit.

E-80 E-81