JVC BR-HD50 manual „ System 2/2 Menu

MENU SCREENS

Description of the Menu screens (continued)

SYSTEM Menu screens (continued)

Item	Setting				Description
LONG PAUSE	E30SEC (00)	Select the time when BR-HD50 enters the TAPE PROTECTION
TIME	1MIN (01)	mode if the unit has stayed at still or stop for a prolonged period of
(0102)	2MIN (02)	time. The TAPE PROTECTION mode in at STILL can be selected
	3MIN (03)	from LONG PAUSE MODE:
	5MIN (04)	30SEC : 30 seconds
		1MIN		: 1 minute	3MIN	: 3 minutes
		2MIN		: 2 minutes	5MIN	: 5 minutes
			Memo
		To
			prevent the video head from clogged or the tape from being
		damaged, set as short a time as possible.
REC LONG	30SEC (00)	Select the time when BR-HD50 enters the TAPE PROTECTION
P.TIME	1MIN (01)	mode if the unit has stayed at recording pause for a prolonged
(0103)	2MIN (02)	period of time.
	3MIN (03)	30SEC : 30 seconds
	E5MIN (04)	1MIN		: 1 minute	3MIN	: 3 minutes
		2MIN		: 2 minutes	5MIN	: 5 minutes
			Memo
		To
			prevent the video head from clogged or the tape from being
		damaged, set as short a time as possible.
LONG PAUSE	F.ADV (00)	For selecting the action when BR-HD50 stays at still for a long time.
MODE	ESTBY-OFF (01)	In the case of RECORDING PAUSE or STOP, it enters the
(0104)		STANDBY-OFF status:
		F.ADV		: Frame-advances BR-HD50 five times in the forward
				direction. On the 6th attempt, this mode stops it.
		STBY-OFF : Stops BR-HD50.
“Q,S” KEY	INDEX (00)	For selecting the function for the SEARCH+/S button and
FUNC.	EVAR/RECV	SEARCH–/Q button.
(0105)	(01)	INDEX		: Performs index search. (XPage 54)
		VAR/RECV : Changes the search speed during a search. (XPage 53)
				Enables adjusting analog audio input level. (XPage 44)
REPEAT MODE	EOFF (00)	For enabling/disabling repeat playback and selecting the type of
(0106)	INDEX (01)	repeat playback.
	V. END (02)	OFF		: No repeat playback
	TAPE END (03)	INDEX		: Repeat playback between the positions where
				index signals are recorded.
		V. END		: Repeat playback from the beginning of the tape to
				the position where video signal recording ends.
		TAPE END : Repeat playback from the beginning to the end of
				the tape.
NEXT PAGE		For displaying the SYSTEM [2/2] Menu screen.
PAGE BACK		For returning to the TOP Menu screen.

„SYSTEM [2/2] Menu

Item	Setting				Description
DC IN MODE	EOPE OFF (00)	For selecting the action to perform when the power is supplied to
(0107)	OPE ON (01)	the DC IN terminal:
		OPE OFF : Sets BR-HD50 to the OPERATE OFF mode.
		OPE ON : Sets BR-HD50 to the OPERATE ON mode.
INDEX WRITE	OFF (00)	For enabling/disabling index signal recording.
(0108)	EON (01)	OFF : No index signal
		ON : Select here to record index signals.
				It records an index signal automatically at the position
				where recording starts.
OPERATION	EOFF (00)	For enabling/disabling OPERATION LOCK.
LOCK	ON (01)	OFF : Turns off OPERATION LOCK and the operation buttons of
(0109)				BR-HD50 can be used.
		ON : Turns on OPERATION LOCK. The operation buttons and
				slide switches of BR-HD50 are disabled except the OPER-
				ATE ON button and MENU operation. (XPage 36)
60/50 SEL	60 (00)	Sets HD video signal format to 60Hz or 50Hz.
(010A)	50 (01)	This menu item applies only to HDV format.
		This must be set in the following situations.
		• Set this menu item to match the input video signal format when
			inputting HDV signals to the IEEE1394 terminal.
		• Set this menu item to match the video format recorded on the
			tape when playing a tape recorded with HDV signals.
		60 : The HD signal format becomes 60Hz.
		50 : The HD signal format becomes 50Hz.
		[Settings upon shipping: U model: 60, E model: 50]
			Memo
		z
			The unit restarts when this menu setting is changed.
		z The front panel 60 or 50 indicator is lit, according to this menu setting.
		z Recording and playback are unavailable when this menu setting dif-
			fers from the HDV input signal or HDV recorded tape signal format.
		z During DV/analog signal input or when playing a tape recorded with DV/
			analog signals, the field frequency format is fixed for the region, regard-
			less of this menu setting. [U model: 60Hz (NTSC), E model: 50Hz (PAL)]
FACTORY SET	ECANCEL (00)	For enabling/disabling the factory setting for the Menu screens.
TING	EXECUTE (01)	CANCEL : Disable the factory setting
(010b)		EXECUTE: Enable the factory setting
			Memo
		The unit restarts when this menu setting is executed.
PB TAPE	EAUTO (00)	Selects whether to automatically detect playback tape video for-
FORMAT	DV (01)	mat, or to playback only a specific format.
(010c)	HDV (02)	AUTO		: Automatically detects and plays back all video formats.
	DVCAM (03)	DV		: Plays back only video in DV format.
		HDV : Plays back only video in HDV format.
		DVCAM : Plays back only video in DVCAM format.
			Memo
		z
			When set to a specific format and a tape with a different format
			is played back, there will be noise in the video.
		z If you play back a tape containing both DV and HDV formats,
			the video signal is disturbed when the signal is switched.
DRUM HOUR		For displaying the time of drum usage.
METER		* The cursor cannot be brought to this item.
PAGE BACK		For returning to the SYSTEM [1/2] Menu screen.

E-68 E-69