JVC BR-HD50 „ Dvcam indicator light, „ 60 indicator light, „ 50 indicator light, 7COUNTER switch

Page 9

NAMES AND FUNCTIONS OF PARTS

Front panel (continued)

a

b c

9

0

8 7 6 5

5[REMOTE/LOCAL] switch

 

 

6[INPUT SELECT] switch

8[IEEE1394] IEEE1394 terminal switch

Set this switch according to the video format of the IEEE1394 input signal and playback sig- nal. When the video format is HDV, a HDV indicator is lit.

HDV : Use this setting when the video format is HDV (HDV indicator is lit).

DV : Use this setting when the video format is DV (HDV indicator is off).

Note

z Video and audio recording and playback using

the IEEE1394 terminal are unavailable when

the switch setting differs from the video format.

z When the IEEE1394 terminal is used to input/

output video or audio signals with a non-linear

editing system, and the format is changed by

„[DVCAM] indicator light

Lights when playing a tape recorded in DVCAM format.

Only tapes recorded in SP mode can be played.

„[60] indicator light

Lights when 60/50 SEL in the SYSTEM [2/2] Menu screen is set to 60.

The HD signal format on this unit is set to 60Hz.

„[50] indicator light

Lights when 60/50 SEL in the SYSTEM [2/2] Menu screen is set to 50.

The HD signal format on this unit is set to 50Hz.

Memo

This switch is used to select how BR-HD50 is to be operated.

LOCAL : Use this setting if BR-HD50 is to

This switch is used to select input signals. HDV/DV : Inputs IEEE1394 terminal HDV sig-

nals or DV signals.

switching this switch, either reconnect the

IEEE1394 cable, or use the OPERATE button

to reset the power.

The field frequency for DV signals and analog signals are fixed by region.

(U model: 60Hz, E model: 50Hz)

be controlled with the key opera- tion of the unit.

REMOTE : Use this setting to control this unit using the REMOTE terminal, SERIAL REMOTE terminal, or IEEE1394 terminal.

Memo

zSelect to enable/disable operation with the REMOTE terminal, using REMOTE SEL 9P on the REMOTE [1/2] Menu screen.

zTo control BR-HD50 with the SERIAL REMOTE terminal or IEEE1394 terminal, this switch setting can be set up with REMOTE SEL SERIAL or REM SEL HDV/DV in the REMOTE [1/2] Menu screen. (XPage 70)

zIf it is set to REMOTE, the buttons that can be operated from the unit are selectable from LOCAL FUNCTION in the REMOTE [1/2] Menu screen.

The 8 IEEE1394 switch needs to be set, according to whether the video format is HDV or DV.

LINE : For inputting the composite images of the LINE IN terminal and analog audio signals.

Y/C : For inputting the Y/C separate video signal of the Y/C IN terminal and analog audio signals.

Note

zSwitching is invalid during recording.

zSwitching this switch during playback may briefly cut off the audio.

7[COUNTER] switch

Switches the displayed information on the 9 counter display and the monitor counter dis- play.

CTL : It displays the counter in hour, minute, second and frame based on CTL (con- trol signal).

TC : It displays the time code data.

UB : It displays the user’s bit (UB).

9Counter display

Displays the counter, menu settings, and oper- ation mode. (8 digits)

•Counter display

The displayed contents can be selected using the 7 COUNTER switch.

•For menu settings, menu code numbers are displayed.

0Audio level indicator

Displays the audio level for CH-1/3 and CH-2/ 4.

In RECORDING mode, audio recording level is displayed. In PLAY mode, audio playback level is displayed.

Only the audio recording level during analog input can be adjusted.

aIndicator lights

„[HDV] indicator light

Lights when the video format for the IEEE1394 terminal input signal or playback signal is HDV. When this indicator is lit, set the 8 IEEE1394 switch to HDV.

When this indicator is off, set the 8 IEEE1394 switch to DV.

„[REC INH] indicator light

Lights upon loading a cassette that cannot be recorded.

b[PHONES] terminal

This is the mini jack terminal for connecting to the headphone. (Stereo ø3.5)

•When playing back tapes recorded in 32kHz mode, the audio channel output from this terminal is selected using A.OUTPUT: DV on the AUDIO Menu screen.

c[PHONES] Headphone volume

Use this switch to adjust the output level of the PHONES terminal.

Both channels are adjusted at the same time.

E-12

E-13

Page 8 Page 10
Image 9
Page 8 Page 10
Contents BR-HD50HD Video Cassette Recorder For Customer UseBR-HD50U Serial No LLT0088-001AInformation Important SafeguardsRemarque Information for Canada Renseignement Pour CanadaFor Your Safety Please Read the Following Text Carefully Power SystemMust be Earthed For Continental EUROPE, ETC For U.K. onlyTable of Contents Introduction Remarks of usageCassette tape HDV and DV format Cleaning tape Regular maintenance„ Regular maintenance „ Head cleaningNames and Functions of Parts „ 60 indicator light „ Dvcam indicator light„ 50 indicator light 7COUNTER switchFRESET button EMENU button HSpecial functions/Setting buttons„ BLANK/P button „ SEARCH+/S button DHOLD button GCUE UP button9CH2/4 Audio OUT terminal RCA 0HDMI OUT Hdmi signal output termi- nal2VIDEO Y/C in terminal 4-PIN 3VIDEO Line OUT terminal BNCCDC power cord clamp BDC power input terminalDSIGNAL GND terminal ESERIAL Remote terminal mini jackON-SCREEN Display „ DV format„ HDV format Date/time VCR operation modeCounter display Remaining tapeDisplay displayed during operation Description Event/Alarm displayDisplay displayed for about 3 seconds Description Display Description„ Output signal „ Input signalConnection Connecting audio signals Attaching the supplied ferrite coreDigital input IEEE1394 terminal 6P To the DC cord. XPage „ Operate BR-HD50 with the wired remote controllerComponent OUT RECORDING/OUTPUT Signal FormatTurning off the power Turning on the power„ Output terminal video/audio signal format during playback PreparationOperation Lock mode Selecting the operating method main unit/remote controllerLoading the cassette tape Ejecting the cassette tapeSelecting date/time display Setting date and timeOn-screen status display „ Display Menu screenSetting the Menu screen Check settingsSetting Menu screens RecordingTting related Menu screen Selecting input signalAdjusting audio recording level SettingsSource unit Recording index signalsPlayback Video settingsAudio settings Settings regarding playback functionFast forward/rewind Frame-advance playback Slow playback and Search modeIndex search „ Repeat Mode in the System 1/2 Menu screenBlank search „ In the Stop mode, press the Blank buttonRegistering cue-up points Changing cue-up pointsExiting the Multi Cue-up screen Searching cue-up points„ NDF/DF 60 U model only Time CodeTCG Select Preset Recording from preset data„ Set the TC/UB/CLOCK 1/2 Menu as follows TCG Select RegenControl with the IEEE1394 ter- minal Digital signals Control with RS-422A Analog signalsEdit „ Remote 2/2 Menu screenSetting the menus „ Set BR-HD50 to the Stop or Still modeMenu Screens Menu screen on counter displayTOP Menu screen System Menu screens„ System 1/2 Menu screens „ System 2/2 Menu Remote Menu screens Video Menu Screen Audio Menu ScreenTest Signal Hdmi ModeOUT for Down ConvTC/UB/CLOCK Menu screens „ TC/UB/CLOCK 1/2 Menu screen„ TC/UB/CLOCK 2/2 Menu screen „ Alarm display Displayed regardless of the Display mode OthersDisplay Menu screen „ Warning display Displayed regardless of the Display mode „ Set BR-HD50 to the Stop mode „ Accessories „ Connectors„ External dimensions Unit mm „ GeneralImportant Safety Instructions „ AC adapter sectionSupplement
Top Page Image Contents