JVC BR-HD50 manual Remote Menu screens

MENU SCREENS

Description of the Menu screens (continued)

REMOTE Menu screens

The REMOTE Menu consists of the following two screens (1/2 and 2/2).

„REMOTE [1/2] Menu screen

Item	Setting					Description
REMOTE SEL	OFF (00)	For enabling/disabling the REMOTE terminal when the REMOTE/
9P	EON (01)	LOCAL switch on the front panel is set to REMOTE.
(0200)		OFF : Control through RS-422A disabled.
		ON : Control through RS-422A enabled.
REMOTE SEL	OFF (00)	For enabling/disabling control via the SERIAL REMOTE terminal.
SER	EON (01)	OFF		: Control disabled regardless of the settings of the
(0201)	LOC+REM (02)			REMOTE/LOCAL switch.
		ON		: Control enabled only when the REMOTE/LOCAL
				switch is set to REMOTE.
		LOC+REM : Control				enabled regardless of the settings of the
				REMOTE/LOCAL switch.
REM SEL	OFF (00)	For enabling/disabling control via the IEEE1394 terminal.
HDV/DV	EON (01)	OFF		: Control disabled regardless of the settings of the
(0202)	LOC+REM (02)			REMOTE/LOCAL switch.
		ON		: Control enabled only when the REMOTE/LOCAL
				switch is set to REMOTE.
		LOC+REM : Control				enabled regardless of the settings of the
				REMOTE/LOCAL switch.
LOCAL	NO KEY (00)	For selecting the buttons of BR-HD50 to be enabled in remote-
FUNCTION	EJECT (01)	controlling it with the REMOTE terminals or the SERIAL REMOTE
(0203)	ESTP+EJT (02)	terminal:
	ALL KEYS (03)	NO KEY : No button enabled.
		EJECT		: Only the EJECT button enabled.
		STP + EJT : Only the STOP button and the EJECT button are
				enabled.
		ALL KEYS : All operation buttons are enabled.
			Memo
		If			LOCK in the SYSTEM [2/2] Menu screen is set to
			OPERATION
		ON, the buttons on BR-HD50 will be disabled regardless of the
		setting here.
PREROLL	3SEC (00)	For setting the preroll time of BR-HD50 in remote-controlling it
(0204)	5SEC (01)	with the REMOTE terminal. Setting done with the editing remote
	E7SEC (02)	controller prevails over other settings:
	10SEC (03)	3SEC		: 3 seconds		7SEC : 7 seconds
		5SEC		: 5 seconds		10SEC: 10 seconds
			Memo
		To			editing precision, please set it to at least 7 seconds.
			enhance
NEXT PAGE		For displaying the REMOTE [2/2] Menu screen.
PAGE BACK		For returning to the TOP Menu screen.

„REMOTE [2/2] Menu screen

Item	Setting		Description
REM FF/REW	EFF/REW (00)	For setting the action to be performed when the REMOTE termi-
MODE	SEARCH (01)	nal or IEEE1394 terminal received an FF/REW command:
(0205)		FF/REW : Sets BR-HD50 to perform FF/REW when an FF/REW
			command is received. Normal setting.
		SEARCH : Sets BR-HD50 to perform searching when an FF/
			REW command is received. Use this setting if the
			search (cue up) function does not work properly.
REM STOP SEL	EEE (00)	For setting the action to be performed when the REMOTE termi-
(0206)	PB (01)	nal received a STANDBY-ON command:
		EE: Sets BR-HD50 to the EE mode. (It goes into the STOP mode.)
		PB : Sets BR-HD50 to the PLAY mode. (It goes into the STILL mode.)
PB START	E0F (00)	For adjusting the edit timing. With the remote controller in use, if
DELAY		the start points of edit are not concurrent, adjust the playback
(0207)	9F (09)	startup timing:
	10F (0A)	0F	: No correction.
		1F to 15F : Delays the timing by the number of frames set by the
	15F (0F)		user. When BR-HD50 is connected to an editing
			remote controller with no bump function, use this set-
			ting to adjust the editing precision.
SYNCHRONI-	OFF (00)	For enabling/disabling the bump function when BR-HD50 is con-
ZATION	EON (01)	nected to an editing remote controller:
(0208)		OFF: No synchronization.
		ON : Performs synchronization. The editing precision is
			enhanced. Please set the pre-roll time to at least 7 seconds.
CONTROLLER	ETYPE1 (00)	For setting the type of controller to be connected when remote
SEL	TYPE2 (01)	control is enabled with the RS-422A interface:
(0209)	TYPE3 (02)	TYPE1 : RM-G820
	TYPE4 (03)	TYPE2 : RM-G860 (set the preroll time to at least 10 seconds)
	TYPE5 (04)	TYPE3 : AG-A850
	TYPE6 (05)	TYPE4 : RM-450, PVE-500
	TYPE7 (06)	TYPE5 : FXE-100, FXE-120
		TYPE6 : (Not in use)
		TYPE7 : Avid Xpress DV, Canopus
			DV Rex-RT Professional
FOOT SW	EOFF (00)	For setting when an external switch (e.g., a footswitch) is con-
(020A)	L EDGE (01)	nected to the SERIAL REMOTE terminal. Before operating an
	H EDGE (02)	external switch (footswitch) with L EDGE or H EDGE, turn BR-
	L LEVEL (03)	HD50 to the RECORDING PAUSE or RECORDING mode:
		OFF	: For when the external switch is not used.
		L EDGE : Recording and recording pause is switched at the
			LOW edge of the external switch signal.
		H EDGE : Recording and recording pause is switched at the
			HIGH edge of the external switch signal.
		L LEVEL : Record at the LOW edge and pause recording at the
			HIGH edge of the external switch signal.
PAGE BACK		Return to the REMOTE [1/2] Menu screen.

E-70 E-71