JVC manual Operate BR-HD50 with the wired remote controller, To the DC cord. XPage

Page 18

CONNECTION

Connecting with SERIAL REMOTE terminals

The following describes examples of SERIAL REMOTE terminal connection.

To use the SERIAL REMOTE terminals, set REMOTE SEL SER of the REMOTE [1/2] Menu screen to “ON” or “LOC+REM.” (XPage 70)

Operate BR-HD50 with the wired remote controller

Connect the wired remote controller to the

SERIAL REMOTE terminal.

SERIAL
REMOTE	Wired remote
	Wired remote
	controller

Start/stop recording with an external switch, e.g., a foot switch.

Connect an external switch, e.g., a foot switch, to the SERIAL REMOTE terminal.

The format of the input signals can be selected with FOOT SW in the REMOTE [2/2] Menu screen. (XPage 71)

SERIAL

REMOTE

Foot

switch

CONNECTION

Connecting the AC adapter

Connect the supplied AC adapter to BR-HD50.

1. Clamp
Screw	3. Clamp
	3. Clamp
Supplied AC adapter
	DC IN terminal
	4.

DC cord	2.	Supplied power cord
DC cord	2.
Supplied ferrite core		5.
OPERATE indicator			Always attach the supplied ferrite core
			to the DC cord. (XPage 29)
OPERATE			1. Remove one screw on the back panel of the
OPERATE			unit, and remove the DC cord clamp.
button			unit, and remove the DC cord clamp.
			2. Connect the DC cord of the AC adapter to
			the DC IN terminal of BR-HD50.
			3. To prevent accidental disconnection of the
			DC cord, insert the DC cord into the clamp,
			orient the clamp as shown in the figure
Memo			above, and secure the clamp to the unit.
Memo			Use the screw removed in step 1 above to
z Even in the OPERATE OFF mode, a small			secure the clamp to the unit.
amount of electricity will still flow into the unit.			4. Connect the supplied power cord to the AC
z When the unit is in the OPERATE OFF mode,			IN terminal of the AC adapter.
no operation can be performed except that of			5. Connect the power cord to the power out-
the OPERATE buttons and cassette loading/			let.

ejecting.	• BR-HD50 is turned on and the OPERATE
	• BR-HD50 is turned on and the OPERATE
	indicator lights up in red.
	(OPERATE OFF mode)
	• If DC IN MODE of the SYSTEM [2/2] Menu
	screen is set to “OPE ON”, the OPERATE
	indicator will light up in green.
	(OPERATE ON mode)

Note

zSupply power to BR-HD50 using the supplied AC adapter. Do not use other power sources.

zDo not unplug the DC cord and/or the power cord during recording or playback.

zIf the supply voltage is low, an alarm display of “LOW VOLTAGE” is shown.

LOW VOLTAGE

Alarm message

E-30

E-31

Image 18

Contents BR-HD50U For Customer UseBR-HD50HD Video Cassette Recorder Serial No LLT0088-001ARemarque Important SafeguardsInformation Information for Canada Renseignement Pour CanadaMust be Earthed Power SystemFor Your Safety Please Read the Following Text Carefully For Continental EUROPE, ETC For U.K. onlyTable of Contents Introduction Remarks of usageCassette tape HDV and DV format „ Regular maintenance Regular maintenanceCleaning tape „ Head cleaningNames and Functions of Parts „ 50 indicator light „ Dvcam indicator light„ 60 indicator light 7COUNTER switch„ BLANK/P button EMENU button HSpecial functions/Setting buttonsFRESET button „ SEARCH+/S button DHOLD button GCUE UP button2VIDEO Y/C in terminal 4-PIN 0HDMI OUT Hdmi signal output termi- nal9CH2/4 Audio OUT terminal RCA 3VIDEO Line OUT terminal BNCDSIGNAL GND terminal BDC power input terminalCDC power cord clamp ESERIAL Remote terminal mini jackON-SCREEN Display „ DV format„ HDV format Counter display VCR operation modeDate/time Remaining tapeDisplay displayed for about 3 seconds Description Event/Alarm displayDisplay displayed during operation Description Display Description„ Output signal „ Input signalConnection Connecting audio signals Attaching the supplied ferrite coreDigital input IEEE1394 terminal 6P „ Operate BR-HD50 with the wired remote controller To the DC cord. XPageRECORDING/OUTPUT Signal Format Component OUT„ Output terminal video/audio signal format during playback Turning on the powerTurning off the power PreparationLoading the cassette tape Selecting the operating method main unit/remote controllerOperation Lock mode Ejecting the cassette tapeOn-screen status display Setting date and timeSelecting date/time display „ Display Menu screenSetting Menu screens Check settingsSetting the Menu screen RecordingSelecting input signal Tting related Menu screenSettings Adjusting audio recording levelRecording index signals Source unitVideo settings PlaybackAudio settings Settings regarding playback functionFast forward/rewind Slow playback and Search mode Frame-advance playbackBlank search „ Repeat Mode in the System 1/2 Menu screenIndex search „ In the Stop mode, press the Blank buttonExiting the Multi Cue-up screen Changing cue-up pointsRegistering cue-up points Searching cue-up pointsTime Code „ NDF/DF 60 U model only„ Set the TC/UB/CLOCK 1/2 Menu as follows Recording from preset dataTCG Select Preset TCG Select RegenEdit Control with RS-422A Analog signalsControl with the IEEE1394 ter- minal Digital signals „ Remote 2/2 Menu screenMenu Screens „ Set BR-HD50 to the Stop or Still modeSetting the menus Menu screen on counter displayTOP Menu screen System Menu screens„ System 1/2 Menu screens „ System 2/2 Menu Remote Menu screens Audio Menu Screen Video Menu ScreenOUT for Hdmi ModeTest Signal Down ConvTC/UB/CLOCK Menu screens „ TC/UB/CLOCK 1/2 Menu screen„ TC/UB/CLOCK 2/2 Menu screen „ Alarm display Displayed regardless of the Display mode OthersDisplay Menu screen „ Warning display Displayed regardless of the Display mode „ Set BR-HD50 to the Stop mode „ External dimensions Unit mm „ Connectors„ Accessories „ GeneralImportant Safety Instructions „ AC adapter sectionSupplement