JVC BR-HD50 manual TC/UB/CLOCK Menu screens, „ TC/UB/CLOCK 1/2 Menu screen

MENU SCREENS

Description of the Menu screens (continued)

TC/UB/CLOCK Menu screens

The TC/UB/CLOCK Menu consists of the following two screens. (1/2 and 2/2)

„TC/UB/CLOCK [1/2] Menu screen

Item	Setting			Description
TCG SELECT	PRESET (00)	For selecting the time code generator mode.
(0500)	EREGEN (01)	PRESET		: PRESET mode
		REGEN		: REGENERATION mode
NDF/DF [60]	NON DROP (00)	For selecting the framing mode of the time code generator.
(0501)	EDROP (01)	(Only for U model)
		* Select here in the PRESET mode.
		NON DROP : NON-DROP mode
		DROP		: DROP-FRAME mode
DF BIT [50]	OFF (00)	For selecting whether to record drop-frame bits. (Only for E
(0502)	EON (01)	model)
		(In DV format mode only)
		OFF	: No recording
		ON	: Recording
TC DUPLI.: DV	EOFF (00)	For selecting the type of time code to be recorded with DV signal
(0503)	AUTO (01)	input (In DV format only).
	NON DROP (02)	OFF		: Records time code of the built-in time code genera-
				tor of BR-HD50.
		AUTO		: Records the time code input to the IEEE1394 ter-
				minal. The framing mode of the time code will be
				set automatically to the framing of the time code
				input.
		NON DROP : Records the time code input to the IEEE1394 ter-
				minal. The framing mode of the time code is fixed
				to non-drop framing. (Only for U model)
				Use this setting for dubbing tapes recorded with
				BR-DV600, GY-DV500 or GY-DV550 in the NON-
				DROP FRAME mode. (Only for U model)
TC OFFSET	EOFF (00)	For setting up the timing when time code data from the REMOTE
(0504)	+1F (01)	terminal of BR-HD50 to the editing remote controller are output.
	+2F (02)	OFF	: Normal setting
	–2F (03)	+1F : Outputs time code data +1 frame.
	–1F (04)	+2F : Outputs time code data +2 frames.
		–2F : Outputs time code data -2 frames.
		–1F : Outputs time code data –1 frame.
NEXT BACK		For displaying the TC/UB/CLOCK [2/2] Menu screen.
PAGE BACK		For returning to the TOP Menu screen.

„TC/UB/CLOCK [2/2] Menu screen

	Item	Setting		Description
U-BIT [50]		OFF (00)	For selecting whether to record user’s bit. (Only for E model)
(0505)		EON (01)	* Functions in DV format mode only.
			OFF	: No recording
			ON	: Recording
CLOCK			For displaying the CLOCK ADJUST screen
ADJUST..			For setting, refer to page 38 “Setting date and time”.
(0506)
	DATE [MM/DD/YY]		Sets the date. The item name differs by model.
	(0507)		U model: DATE [MM/DD/YY], E model: DATE [DD/MM/YY]
	TIME		Sets the time.
	(0508)
	PAGE BACK		Returns to the TC/UB/CLOCK [2/2] Menu screen.
PAGE BACK			For returning to the TC/UB/CLOCK [1/2] Menu screen.

E-76 E-77