JVC BR-HD50 manual HDV and DV format

Page 6

INTRODUCTION

HDV and DV format

This unit records in HDV or DV format.

DV format is a standard for recording SD (Standard-Definition) video onto DV cassettes or mini DV cas- settes.

HDV format is a standard for recording HD (High-Definition) video onto DV cassettes or mini DV cas- settes.

The two HDV recording formats are HDV 720p and HDV 1080i. HDV 720p : 720p (720 effective scanlines, progressive scan) HDV 1080i : 1080i (1080 effective scanlines, interlace scan) This unit supports the HDV 720p format.

HDV

60 or 50

[IEEE1394] switch

„HDV and DV signal input/output

HDV signals and DV signals are input/output from the IEEE1394 terminal. HDV signals from the IEEE1394 terminal are recorded in HDV format. DV signals from the IEEE1394 terminal are recorded in DV format.

Recorded HDV signals or DV signals are output from the IEEE1394 terminal during playback.

Digital audio is also input/output from the IEEE1394 terminal, together with HDV signals or DV signals. The front panel IEEE1394 switch must be set on the front panel, according to whether the input/output signal from the IEEE1394 terminal is in HDV format or DV format.

When the input signal or playback signal is in HDV format, the front panel HDV display is lit. Analog signal input is digitally converted and recorded in DV format.

„HDV (720p) and DV format

 

HDV 720p format

 

DV format

 

 

 

Video signal *1

60Hz:720/30p, 720/24p, 480/60p

U (NTSC) : 480/60i

 

50Hz:720/25p, 576/50p

 

 

 

E (PAL)

: 576/50i

 

 

 

 

 

Pixel count

1280 × 720

U (NTSC) : 720 × 480

 

720 × 480 (480/60p)

 

 

 

E (PAL)

: 720 × 576

 

720 × 576 (576/50p)

 

 

 

 

 

 

 

Aspect ratio

16:9

4:3 (16:9)

 

 

 

 

 

Video compression

MPEG-2 Video (Profile & level: MP@H-14)

DV

 

format

 

 

 

 

 

 

Bit rate after

About 19 Mbps

About 25 Mbps

compression

 

 

 

 

 

 

Audio compression

MPEG1 Audio Layer II

Linear PCM

format

 

 

 

 

 

 

Audio channels

2CH (48 kHz,16 bit)

2CH (48 kHz,16 bit)

 

 

4CH (32 kHz,12 bit) *2

 

 

 

 

*1 : For HDV/DV signals, the unit records the same signals as the input signals.

*2 : During analog audio input, only CH1/CH2 are recorded.

Viewing video signal display (Example)

720/30p: 720 effective scanlines, 30-frame progressive scan

480/60i: 480 effective scanlines, 60-field interlace scan

„Recording time

The recording/playback speed for HDV format is SP mode only.

Though DV format recording and playback speed has SP and LP modes, this unit supports SP mode only.

The cassette recording time is the same for HDV and DV format.

„HD signal format

This unit is compatible with both 60Hz and 50Hz HD signal formats. The HDV signal format must be set on this unit, according to whether the input/playback HD signal format is 60Hz or 50Hz.

(Set this using 60/50 SEL in the SYSTEM [2/2] Menu screen.)

Menu settings on this unit can be checked by whether the front panel 60 or 50 indicator light is lit.

Standard DV

Recording time

cassettes

 

LA-DV276

About 276 minutes

 

 

LA-DV186

About 186 minutes

 

 

LA-DV124

About 124 minutes

Mini DV cassettes

Recording time

M-DV63PRO

About 63 minutes

 

 

M-DV63HD

About 63 minutes

The field frequency for DV signals and analog signals is fixed by region. [U model: 60Hz (NTSC), E model: 50Hz (PAL)]

„HD video output

HD video is output from the HDMI OUT terminal and the COMPONENT OUT terminal.

HDMI OUT terminal : Outputs HD/SD digital video and digital audio.

This is connected to a monitor with an HDMI terminal. (HDMI : High Definition Multimedia Interface)

COMPONENT OUT terminal: Outputs HD/SD analog video. Does not output audio.

This is connected to an HD-compatible monitor with COMPONENT input terminal.

zThe video format to output from the HDMI OUT terminal and the COMPONENT OUT terminal can be selected using OUT FORMAT [60]/OUT FORMAT [50] in the VIDEO Menu screen.

E-6

E-7

Image 6
Contents BR-HD50U For Customer UseBR-HD50HD Video Cassette Recorder Serial No LLT0088-001ARemarque Important SafeguardsInformation Information for Canada Renseignement Pour CanadaMust be Earthed Power SystemFor Your Safety Please Read the Following Text Carefully For Continental EUROPE, ETC For U.K. onlyTable of Contents Introduction Remarks of usageCassette tape HDV and DV format „ Regular maintenance Regular maintenanceCleaning tape „ Head cleaningNames and Functions of Parts „ 50 indicator light „ Dvcam indicator light„ 60 indicator light 7COUNTER switch„ BLANK/P button EMENU button HSpecial functions/Setting buttonsFRESET button „ SEARCH+/S button DHOLD button GCUE UP button2VIDEO Y/C in terminal 4-PIN 0HDMI OUT Hdmi signal output termi- nal9CH2/4 Audio OUT terminal RCA 3VIDEO Line OUT terminal BNCDSIGNAL GND terminal BDC power input terminalCDC power cord clamp ESERIAL Remote terminal mini jackON-SCREEN Display „ DV format„ HDV format Counter display VCR operation modeDate/time Remaining tapeDisplay displayed for about 3 seconds Description Event/Alarm displayDisplay displayed during operation Description Display Description„ Output signal „ Input signalConnection Connecting audio signals Attaching the supplied ferrite coreDigital input IEEE1394 terminal 6P „ Operate BR-HD50 with the wired remote controller To the DC cord. XPageRECORDING/OUTPUT Signal Format Component OUT„ Output terminal video/audio signal format during playback Turning on the powerTurning off the power PreparationLoading the cassette tape Selecting the operating method main unit/remote controllerOperation Lock mode Ejecting the cassette tapeOn-screen status display Setting date and timeSelecting date/time display „ Display Menu screenSetting Menu screens Check settingsSetting the Menu screen RecordingSelecting input signal Tting related Menu screenSettings Adjusting audio recording levelRecording index signals Source unitVideo settings PlaybackAudio settings Settings regarding playback functionFast forward/rewind Slow playback and Search mode Frame-advance playbackBlank search „ Repeat Mode in the System 1/2 Menu screenIndex search „ In the Stop mode, press the Blank buttonExiting the Multi Cue-up screen Changing cue-up pointsRegistering cue-up points Searching cue-up pointsTime Code „ NDF/DF 60 U model only„ Set the TC/UB/CLOCK 1/2 Menu as follows Recording from preset dataTCG Select Preset TCG Select RegenEdit Control with RS-422A Analog signalsControl with the IEEE1394 ter- minal Digital signals „ Remote 2/2 Menu screenMenu Screens „ Set BR-HD50 to the Stop or Still modeSetting the menus Menu screen on counter displayTOP Menu screen System Menu screens„ System 1/2 Menu screens „ System 2/2 Menu Remote Menu screens Audio Menu Screen Video Menu ScreenOUT for Hdmi ModeTest Signal Down ConvTC/UB/CLOCK Menu screens „ TC/UB/CLOCK 1/2 Menu screen„ TC/UB/CLOCK 2/2 Menu screen „ Alarm display Displayed regardless of the Display mode OthersDisplay Menu screen „ Warning display Displayed regardless of the Display mode „ Set BR-HD50 to the Stop mode „ External dimensions Unit mm „ Connectors„ Accessories „ GeneralImportant Safety Instructions „ AC adapter sectionSupplement