Acnodes RMC 7132 user manual Connector Definitions, Main ATX Power Supply Connector, Power Button

Page 45

5-9 Connector Definitions

RMC 7132

1U Rackmount System

5-9 Connector Definitions

Main ATX Power Supply Connector

The 24-pin primary power supply connector (JPW1) meets the SSI EPS 12V specification. The 8 - pin CPU PWR connector (JPW2) is also required for the processor. Refer to the table on the right for the pin definitions.

Processor Power Connector

JPW2 must also be connected to the power supply to provide power for the processor. See the table on the right for pin definitions.

Power Button

The power button (from the computer chassis) con- nects to pins 1 and 2 of JF1. See the table on the right for pin definitions.

Reset Button

The reset button (from the computer chassis) connects to pins 3 and 4 of JF1. See the table on the right for pin definitions.

Power Fail LED

The Power Fail LED connection is located on pins 5 and 6 of JF1. Re- fer to the table on the right for pin definitions.

	© Copyright 2009 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.

Image 45

Contents All rights reserved. Product description and product specifications 1U Rackmount SystemUser Manual RMC7132 1U Rackmount Computer comes withManual Revision Release Date April 26 Chapter 4 System Safety Chapter 2 Server InstallationPreface Manual OrganizationChapter 6 Advanced Chassis Setup Chapter 5 Advanced Motherboard SetupChapter 7 BIOS Appendix A POST Error Beep Codes Appendix B Installing the Windows OSCHAPTER 1 INTRODUCTION CHAPTER 2 INSTALLATIONTable of Contents 1-3 Server Chassis FeaturesCHAPTER 5 ADVANCED MOTHERBOARD SETUP CHAPTER 4 SYSTEM SAFETYCHAPTER 3 System Interface 2-6 Checking the Drive Bay Setup5-5 Installing the Processor and Heatsink 5-6 Installing Memory Modules5-7 Adding PCI Expansion Cards Serial Ports CHAPTER 7 BIOS CHAPTER 6 ADVANCED CHASSIS SETUPAppendix C System Specifications Appendix A POST Error Beep Codes Appendix B Installing the Windows OS1.1 Overview CHAPTER 1 INTRODUCTIONOther Features 1-2 Motherboard FeaturesProcessor Memory1U Rackmount System System Power 1-3 Server Chassis FeaturesSATA Subsystem Control PanelChoosing a Setup Location CHAPTER 2 INSTALLATION2-3 Preparing for Setup 2-1 OverviewServer Precautions Rack PrecautionsAmbient Operating Temperature Rack Mounting ConsiderationsReduced Airflow Mechanical LoadingIdentifying the Sections of the Rack Rails 2-4 Installing the System into a RackInstalling the Rack Rails Installing the Chassis RailsInstalling the Server into the Rack Installing the Server into a Telco Rack Checking the Components 2-5 Checking the Motherboard Setup1U Rackmount System Providing Power 2-6 Checking the Drive Bay SetupChecking the Drives Checking the AirflowPower Reset ButtonCHAPTER 3 SYSTEM INTERFACE 3-1 OverviewOverheat 3-4 Serial ATA Drive Carrier LEDs 4-1 Electrical Safety Precautions CHAPTER 4 SYSTEM SAFETY4-2 General Safety Precautions 4-3 ESD Precautions 4-4 Operating Precautions CHAPTER ADVANCED MOTHERBOARD SETUP Precautions5-1 Handling the Motherboard 5-2 Serverboard Installation Installing to the ChassisUnpacking Connecting Data Cables 5-3 Connecting CablesConnecting Power Cables Connecting the Control Panel5-4 I/O Ports Installing an LGA1366 Processor 5-5 Installing the Processor and Heatsink6. Use your thumb to gently push the socket clip down to the clip lock Installing a Passive CPU Heatsink Removing the Heatsink Installing & Removing DIMMs 5-6 Installing Memory ModulesTo Install To RemoveMaximum Memory Possible Memory Support5-7 PCI Expansion Cards Installing a PCI Expansion Card5-8 Serverboard Details 1U Rackmount System Main ATX Power Supply Connector 5-9 Connector DefinitionsProcessor Power Connector Power ButtonPower On LED HDD LED/UID SwitchOverheat/Fan Fail/UID LED NIC2 LAN2 LEDFan Headers NMI ButtonATX PS/2 Keyboard and PS/2 Mouse Ports Serial PortsChassis Intrusion Onboard Power LEDWake-On-LAN External Speaker/Internal BuzzerUniversal Serial Bus USB Power Supply SMBus HeaderSGPIO Headers LAN1/2 Ethernet PortsAlarm Reset Power Supply Fail LED HeaderI-Button Unit Identifier ButtonVGA Enable/Disable 5-10 Jumper SettingsExplanation of Jumpers CMOS ClearLAN1/2 Enable/Disable Watch Dog Enable/DisableUSB Wake-Up BMC Enable/Disable 5-11 Onboard IndicatorsSMBus to PCI Slots LAN1/2 LEDs1U Rackmount System All rights reserved. Product description and product specificationsCopyright 2005 Acnodes, Inc 661 Brea Canyon Rd., Suite1U Rackmount System Driver/Tool Installation Display Screen 5-13 Installing SoftwareDoctor 1U Rackmount System CHAPTER 6 ADVANCED CHASSIS SETUP 6-1 Static-Sensitive DevicesTools Required 6-2 Control Panel 6-3 System Fans System Fan FailureReplacing System Cooling Fans 6-4 Drive Bay Installation/Removal Accessing the Drive BaysSATA Drive Installation Mounting a SATA Drive in a Drive Carrier Installing/Removing SATA DrivesSATA Power Cables DVD-ROM Drive InstallationInstalling a DVD-ROM Drive 6-5 Power Supply Power Supply FailureReplacing the Power Supply Starting BIOS Setup Utility CHAPTER 7 BIOSHow To Change the Configuration Data 7-1 IntroductionStarting the Setup Utility 7-2 Main SetupSystem Time/System Date System MemorySystem Overview The following BIOS information will be displayed XBIOS Features Quick Boot 7-3 Advanced Setup ConfigurationsQuiet Boot Bootup Num-LockPower Button Function Wait For F1 If ErrorRestore on AC Power Loss PS/2 Mouse SupportHardware Prefetcher Available when supported by the CPU Ratio CMOS SettingAdjacent Cache Line Prefetch Available when supported by the CPU XProcessor & Clock OptionsSimultaneous Multi-Threading Available when supported by the CPU Intel Virtualization Technology Available when supported by the CPUIntel TurboMode Tech Available if Intel EIST technology is Enabled Intel EIST Technology1 - Core Ratio Limit Intel Turbo Boost Configuration Turbo Ratio Limit Program2 ~ 3 - Core Ratio Limit TDC Limit OverrideXAdvanced Chipset Control C-State package limit settingC-STATE Tech C1 Auto DemotionMemory Frequency QPI L0s and L1Memory Mode Demand ScrubbingInlet Temperature High Performance Event TimerTemperature Rise Air FlowIntel VT-d Active State Power ManagementIntel I/OAT USB FunctionsSATA#1 Configuration XIDE / Floppy ConfigurationConfigure SATA#1 as IDE Detect Timeout secLBA/Large Mode TypeBlock Multi-Sector Transfer PIO ModeDMA Mode S.M.A.R.T. For Hard disk drives32Bit Data Transfer PCI Latency Timer XPCI/PnP ConfigurationClear NVRAM Plug & Play OSXRemote Access Configuration XSuper IO Device ConfigurationRemote Access Serial Port1 Address/ Serial Port2 AddressRedirection After BIOS POST XHardware Health ConfigurationCPU Overheat Alarm Terminal TypeCPU Temperature System TemperatureThe item displays the absolute temperature as detected by the BIOS ACPI Version Features XACPI ConfigurationFan Speed Control Modes Fan1 ~ Fan 5 ReadingExecute TPM Command XIPMI ConfigurationTPM Enable/Disable Status XTrusted ComputingSet LAN Configuration Set PEF ConfigurationClear BMC System Event Log BMC Watch Dog Timer Action XEvent Log ConfigurationBMC WatchDog TimeOut MinSec View Event LogSupervisor Password 7-4 Security SettingsUser Password Change Supervisor PasswordBoot Sector Virus Protection Change User Password7-5 Boot Settings XBoot Device PriorityXHard Disk Drives XRemovable Drives 7-6 Exit OptionsXCD/DVD Drives Save Changes and ExitLoad Fail-Safe Defaults Load Optimal DefaultsDiscard Changes and Exit Discard ChangesRecoverable POST Error Beep Codes Appendix A POST Error Beep CodesB-1 Installing Windows on RAID Systems Appendix B Installing the Windows OSB-2 Installing Windows on Non-RAID Systems BIOS Appendix C SpecificationsProcessors ChipsetPower Supply WeightSystem Input Requirements Operating Environment