
RMC 7132
1U Rackmount System
Universal Serial Bus (USB)
There are two Universal Serial Bus ports located on the I/O panel. An additional six USB headers are in- cluded on the board, which may be used for front side access (cables not included). USB 6 and USB 7 are "Type A" connectors. See the table on the right for pin definitions.
SGPIO Headers
The SGPIO (Serial General Purpose Input/Output) headers are used to communicate with an enclo- sure man- agement chip on the backplane. The T- SGPIO headers are for SATA and the
Power Supply SMBus Header
A Power SMB header is located at SMB_PS1. Connect the appropriate cable here to utilize SMB on your system. See the table on the right for pin definitions.
LAN1/2 (Ethernet Ports)
The Ethernet ports (LAN1 and LAN2, plus LAN3 and LAN4 on the X8STi- LN4) are located beside the VGA port on the I/O backplane. These ports accept RJ45 type cables.
| © Copyright 2009 Acnodes, Inc. |
661 Brea Canyon Rd., Suite 3 | All rights reserved. Product description and product specifications |
Walnut, CA 91789 | are subject to change without notice. For latest product information, |
tel: 909.598.7388, fax: 909.598.0218 | please visit Acnodes’ web site at www.acnodes.com. |