RMC 7132
1U Rackmount System
B-2 Installing Windows on Non-RAID Systems
1.Insert Microsoft's Windows XP/2003 Setup CD in the CD drive and the sys- tem will start boot- ing up from the CD.
2.Press the <F6> key when the message "Press F6 if you need to install a third party SCSI or RAID driver" displays.
3.When the Windows XP/2003 Setup screen appears, press "S" to specify ad- ditional device(s).
4.Insert the driver diskette you want to install into Drive A: and press the <En- ter> key.
5.Press the <Enter> key to proceed with the installation process. (If you need to specify any addi- tional devices to be installed, do it at this time.) Once all devices are specified, press the <Enter> key to continue with the installation.
6.From the Windows XP/2003 Setup screen, press the <Enter> key. The XP/2003 Setup will automatically load all device files and then continue with the Windows XP/2003 installation.
7.After the Windows XP/2003 OS installation is complete, the system will auto- matically reboot.
8.Insert the Supermicro Setup CD that came with your system into the CD drive during system boot, and the main screen shown on page
| © Copyright 2005 Acnodes, Inc. |
661 Brea Canyon Rd., Suite 3 | All rights reserved. Product description and product specifications |
Walnut, CA 91789 | are subject to change without notice. For latest product information, |
tel: 909.598.7388, fax: 909.598.0218 | please visit Acnodes’ web site at www.acnodes.com. |