Acnodes RMC 7132 user manual XACPI Configuration, Fan Speed Control Modes, Fan1 ~ Fan 5 Reading

Page 85

Fan Speed Control Modes

RMC 7132

1U Rackmount System

Fan Speed Control Modes

This feature allows the user to decide how the system controls the speeds of the onboard fans. The CPU temperature and the fan speed are correlative. When the CPU on-die temperature increases, the fan speed will also increase, and vice versa. Select Workstation if your system is used as a Worksta- tion. Select Server if your system is used as a Server. Select "Disabled, (Full Speed @12V)" to dis- able the fan speed control function and allow the onboard fans to constantly run at the full speed (12V). The Options are: Disabled, 4-pin (Server), 4-pin (Super Quiet) and 4-pin (Workstation).

Fan1 ~ Fan 5 Reading

This feature displays the fan speed readings from fan interfaces Fan1 through Fan5. Vcore, 3.3Vcc, 12V, V_DIMM, 5V, -12V, 3.3VSB, and VBAT

XACPI Configuration

Use this feature to configure Advanced Configuration and Power Interface (ACPI) power management settings for your system.

USB Device WakeUp

This feature is used to awaken from Standby mode by a Universal Serial Bus (USB) device (such as, a USB mouse or USB keyboard). The options are Enabled and Disabled.

PS/2 KB/MS WakeUp

This feature is used to awaken from Standby mode by a PS/2 mouse or PS/2 keyboard. The options are Enabled and Disabled.

ACPI Aware O/S

Enable ACPI support if it is supported by the OS to control ACPI through the Operat- ing System. Otherwise, disable this feature. The options are Yes and No.

Headless Mode

This feature is used to enable system to function without a keyboard, monitor or mouse attached The options are Enabled and Disabled.

ACPI Version Features

The options are ACPI v1.0, ACPI v2.0 and ACPI v3.0. Please refer to ACPI's website for further expla- nation: http://www.acpi.info/

	© Copyright 2009 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.

Image 85

Contents All rights reserved. Product description and product specifications 1U Rackmount SystemUser Manual RMC7132 1U Rackmount Computer comes withManual Revision Release Date April 26 Chapter 4 System Safety Chapter 2 Server InstallationPreface Manual OrganizationChapter 6 Advanced Chassis Setup Chapter 5 Advanced Motherboard SetupChapter 7 BIOS Appendix A POST Error Beep Codes Appendix B Installing the Windows OSCHAPTER 1 INTRODUCTION CHAPTER 2 INSTALLATIONTable of Contents 1-3 Server Chassis FeaturesCHAPTER 5 ADVANCED MOTHERBOARD SETUP CHAPTER 4 SYSTEM SAFETYCHAPTER 3 System Interface 2-6 Checking the Drive Bay Setup5-6 Installing Memory Modules 5-5 Installing the Processor and Heatsink5-7 Adding PCI Expansion Cards Serial Ports CHAPTER 7 BIOS CHAPTER 6 ADVANCED CHASSIS SETUPAppendix C System Specifications Appendix A POST Error Beep Codes Appendix B Installing the Windows OS1.1 Overview CHAPTER 1 INTRODUCTIONOther Features 1-2 Motherboard FeaturesProcessor Memory1U Rackmount System System Power 1-3 Server Chassis FeaturesSATA Subsystem Control PanelChoosing a Setup Location CHAPTER 2 INSTALLATION2-3 Preparing for Setup 2-1 OverviewServer Precautions Rack PrecautionsAmbient Operating Temperature Rack Mounting ConsiderationsReduced Airflow Mechanical LoadingIdentifying the Sections of the Rack Rails 2-4 Installing the System into a RackInstalling the Rack Rails Installing the Chassis RailsInstalling the Server into the Rack Installing the Server into a Telco Rack Checking the Components 2-5 Checking the Motherboard Setup1U Rackmount System Providing Power 2-6 Checking the Drive Bay SetupChecking the Drives Checking the AirflowPower Reset ButtonCHAPTER 3 SYSTEM INTERFACE 3-1 OverviewOverheat 3-4 Serial ATA Drive Carrier LEDs 4-1 Electrical Safety Precautions CHAPTER 4 SYSTEM SAFETY4-2 General Safety Precautions 4-3 ESD Precautions 4-4 Operating Precautions Precautions CHAPTER ADVANCED MOTHERBOARD SETUP5-1 Handling the Motherboard Installing to the Chassis 5-2 Serverboard InstallationUnpacking Connecting Data Cables 5-3 Connecting CablesConnecting Power Cables Connecting the Control Panel5-4 I/O Ports Installing an LGA1366 Processor 5-5 Installing the Processor and Heatsink6. Use your thumb to gently push the socket clip down to the clip lock Installing a Passive CPU Heatsink Removing the Heatsink Installing & Removing DIMMs 5-6 Installing Memory ModulesTo Install To RemoveMaximum Memory Possible Memory Support5-7 PCI Expansion Cards Installing a PCI Expansion Card5-8 Serverboard Details 1U Rackmount System Main ATX Power Supply Connector 5-9 Connector DefinitionsProcessor Power Connector Power ButtonPower On LED HDD LED/UID SwitchOverheat/Fan Fail/UID LED NIC2 LAN2 LEDFan Headers NMI ButtonATX PS/2 Keyboard and PS/2 Mouse Ports Serial PortsChassis Intrusion Onboard Power LEDWake-On-LAN External Speaker/Internal BuzzerUniversal Serial Bus USB Power Supply SMBus HeaderSGPIO Headers LAN1/2 Ethernet PortsAlarm Reset Power Supply Fail LED HeaderI-Button Unit Identifier ButtonVGA Enable/Disable 5-10 Jumper SettingsExplanation of Jumpers CMOS ClearWatch Dog Enable/Disable LAN1/2 Enable/DisableUSB Wake-Up BMC Enable/Disable 5-11 Onboard IndicatorsSMBus to PCI Slots LAN1/2 LEDs1U Rackmount System All rights reserved. Product description and product specificationsCopyright 2005 Acnodes, Inc 661 Brea Canyon Rd., Suite1U Rackmount System Driver/Tool Installation Display Screen 5-13 Installing SoftwareDoctor 1U Rackmount System 6-1 Static-Sensitive Devices CHAPTER 6 ADVANCED CHASSIS SETUPTools Required 6-2 Control Panel System Fan Failure 6-3 System FansReplacing System Cooling Fans Accessing the Drive Bays 6-4 Drive Bay Installation/RemovalSATA Drive Installation Mounting a SATA Drive in a Drive Carrier Installing/Removing SATA DrivesDVD-ROM Drive Installation SATA Power CablesInstalling a DVD-ROM Drive Power Supply Failure 6-5 Power SupplyReplacing the Power Supply Starting BIOS Setup Utility CHAPTER 7 BIOSHow To Change the Configuration Data 7-1 IntroductionStarting the Setup Utility 7-2 Main SetupSystem Memory System Time/System DateSystem Overview The following BIOS information will be displayed XBIOS Features Quick Boot 7-3 Advanced Setup ConfigurationsQuiet Boot Bootup Num-LockPower Button Function Wait For F1 If ErrorRestore on AC Power Loss PS/2 Mouse SupportHardware Prefetcher Available when supported by the CPU Ratio CMOS SettingAdjacent Cache Line Prefetch Available when supported by the CPU XProcessor & Clock OptionsSimultaneous Multi-Threading Available when supported by the CPU Intel Virtualization Technology Available when supported by the CPUIntel TurboMode Tech Available if Intel EIST technology is Enabled Intel EIST Technology1 - Core Ratio Limit Intel Turbo Boost Configuration Turbo Ratio Limit Program2 ~ 3 - Core Ratio Limit TDC Limit OverrideXAdvanced Chipset Control C-State package limit settingC-STATE Tech C1 Auto DemotionMemory Frequency QPI L0s and L1Memory Mode Demand ScrubbingInlet Temperature High Performance Event TimerTemperature Rise Air FlowIntel VT-d Active State Power ManagementIntel I/OAT USB FunctionsSATA#1 Configuration XIDE / Floppy ConfigurationConfigure SATA#1 as IDE Detect Timeout secLBA/Large Mode TypeBlock Multi-Sector Transfer PIO ModeS.M.A.R.T. For Hard disk drives DMA Mode32Bit Data Transfer PCI Latency Timer XPCI/PnP ConfigurationClear NVRAM Plug & Play OSXRemote Access Configuration XSuper IO Device ConfigurationRemote Access Serial Port1 Address/ Serial Port2 AddressRedirection After BIOS POST XHardware Health ConfigurationCPU Overheat Alarm Terminal TypeSystem Temperature CPU TemperatureThe item displays the absolute temperature as detected by the BIOS ACPI Version Features XACPI ConfigurationFan Speed Control Modes Fan1 ~ Fan 5 ReadingExecute TPM Command XIPMI ConfigurationTPM Enable/Disable Status XTrusted ComputingSet PEF Configuration Set LAN ConfigurationClear BMC System Event Log BMC Watch Dog Timer Action XEvent Log ConfigurationBMC WatchDog TimeOut MinSec View Event LogSupervisor Password 7-4 Security SettingsUser Password Change Supervisor PasswordBoot Sector Virus Protection Change User PasswordXBoot Device Priority 7-5 Boot SettingsXHard Disk Drives XRemovable Drives 7-6 Exit OptionsXCD/DVD Drives Save Changes and ExitLoad Fail-Safe Defaults Load Optimal DefaultsDiscard Changes and Exit Discard ChangesRecoverable POST Error Beep Codes Appendix A POST Error Beep CodesB-1 Installing Windows on RAID Systems Appendix B Installing the Windows OSB-2 Installing Windows on Non-RAID Systems BIOS Appendix C SpecificationsProcessors ChipsetPower Supply WeightSystem Input Requirements Operating Environment