Acnodes RMC 7132 Overheat/Fan Fail/UID LED, NIC2 LAN2 LED, NIC1 LAN1 LED, HDD LED/UID Switch

Page 46

Overheat/Fan Fail/UID LED

RMC 7132

1U Rackmount System

Overheat/Fan Fail/UID LED

Connect an LED to pins 7 and 8 of JF1 to provide UID signals and advanced warning of chassis overheating. Re- fer to the table on the right for pin definitions.

NIC2 (LAN2) LED

The LED connections for LAN2 are on pins 9 and 10 of JF1. Attach an LED cable to display network activ- ity. See the table on the right for pin defini- tions.

NIC1 (LAN1) LED

The LED connections for LAN1 are on pins 11 and 12 of JF1. Attach an LED cable to display network activ- ity. See the table on the right for pin defini- tions.

HDD LED/UID Switch

The HDD LED and UID switch con- nections are located on pins 13 and 14 of JF1. Attach a cable here to indicate HDD activity or UID (Unit Identifica- tion) status. See the table on the right for pin defini- tions.

Power On LED

The Power On LED connector is lo- cated on pins 15 and 16 of JF1 (use JLED for a 3-pin connec- tor). This connection is used to provide LED indication of power being supplied to the system. See the table on the right for pin definitions.

	© Copyright 2005 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.

Image 46

Contents User Manual 1U Rackmount SystemAll rights reserved. Product description and product specifications RMC7132 1U Rackmount Computer comes withManual Revision Release Date April 26 Preface Chapter 2 Server InstallationChapter 4 System Safety Manual OrganizationChapter 7 BIOS Chapter 5 Advanced Motherboard SetupChapter 6 Advanced Chassis Setup Appendix A POST Error Beep Codes Appendix B Installing the Windows OSTable of Contents CHAPTER 2 INSTALLATIONCHAPTER 1 INTRODUCTION 1-3 Server Chassis FeaturesCHAPTER 3 System Interface CHAPTER 4 SYSTEM SAFETYCHAPTER 5 ADVANCED MOTHERBOARD SETUP 2-6 Checking the Drive Bay Setup5-6 Installing Memory Modules 5-5 Installing the Processor and Heatsink5-7 Adding PCI Expansion Cards Serial Ports CHAPTER 6 ADVANCED CHASSIS SETUP CHAPTER 7 BIOSAppendix A POST Error Beep Codes Appendix B Installing the Windows OS Appendix C System SpecificationsCHAPTER 1 INTRODUCTION 1.1 OverviewProcessor 1-2 Motherboard FeaturesOther Features MemoryCopyright 2009 Acnodes, Inc SATA Subsystem 1-3 Server Chassis FeaturesSystem Power Control Panel2-3 Preparing for Setup CHAPTER 2 INSTALLATIONChoosing a Setup Location 2-1 OverviewRack Precautions Server PrecautionsReduced Airflow Rack Mounting ConsiderationsAmbient Operating Temperature Mechanical Loading2-4 Installing the System into a Rack Identifying the Sections of the Rack RailsInstalling the Chassis Rails Installing the Rack RailsInstalling the Server into the Rack Installing the Server into a Telco Rack 2-5 Checking the Motherboard Setup Checking the ComponentsCopyright 2009 Acnodes, Inc Checking the Drives 2-6 Checking the Drive Bay SetupProviding Power Checking the AirflowCHAPTER 3 SYSTEM INTERFACE Reset ButtonPower 3-1 OverviewOverheat 3-4 Serial ATA Drive Carrier LEDs CHAPTER 4 SYSTEM SAFETY 4-1 Electrical Safety Precautions4-2 General Safety Precautions 4-3 ESD Precautions 4-4 Operating Precautions Precautions CHAPTER ADVANCED MOTHERBOARD SETUP5-1 Handling the Motherboard Installing to the Chassis 5-2 Serverboard InstallationUnpacking Connecting Power Cables 5-3 Connecting CablesConnecting Data Cables Connecting the Control Panel5-4 I/O Ports 5-5 Installing the Processor and Heatsink Installing an LGA1366 Processor6. Use your thumb to gently push the socket clip down to the clip lock Installing a Passive CPU Heatsink Removing the Heatsink To Install 5-6 Installing Memory ModulesInstalling & Removing DIMMs To RemoveMemory Support Maximum Memory PossibleInstalling a PCI Expansion Card 5-7 PCI Expansion Cards5-8 Serverboard Details Copyright 2005 Acnodes, Inc Processor Power Connector 5-9 Connector DefinitionsMain ATX Power Supply Connector Power ButtonOverheat/Fan Fail/UID LED HDD LED/UID SwitchPower On LED NIC2 LAN2 LEDATX PS/2 Keyboard and PS/2 Mouse Ports NMI ButtonFan Headers Serial PortsWake-On-LAN Onboard Power LEDChassis Intrusion External Speaker/Internal BuzzerSGPIO Headers Power Supply SMBus HeaderUniversal Serial Bus USB LAN1/2 Ethernet PortsI-Button Power Supply Fail LED HeaderAlarm Reset Unit Identifier ButtonExplanation of Jumpers 5-10 Jumper SettingsVGA Enable/Disable CMOS ClearWatch Dog Enable/Disable LAN1/2 Enable/DisableUSB Wake-Up SMBus to PCI Slots 5-11 Onboard IndicatorsBMC Enable/Disable LAN1/2 LEDsCopyright 2005 Acnodes, Inc All rights reserved. Product description and product specifications1U Rackmount System 661 Brea Canyon Rd., SuiteCopyright 2009 Acnodes, Inc 5-13 Installing Software Driver/Tool Installation Display ScreenDoctor Copyright 2005 Acnodes, Inc 6-1 Static-Sensitive Devices CHAPTER 6 ADVANCED CHASSIS SETUPTools Required 6-2 Control Panel System Fan Failure 6-3 System FansReplacing System Cooling Fans Accessing the Drive Bays 6-4 Drive Bay Installation/RemovalSATA Drive Installation Installing/Removing SATA Drives Mounting a SATA Drive in a Drive CarrierDVD-ROM Drive Installation SATA Power CablesInstalling a DVD-ROM Drive Power Supply Failure 6-5 Power SupplyReplacing the Power Supply How To Change the Configuration Data CHAPTER 7 BIOSStarting BIOS Setup Utility 7-1 Introduction7-2 Main Setup Starting the Setup UtilitySystem Memory System Time/System DateSystem Overview The following BIOS information will be displayed Quiet Boot 7-3 Advanced Setup ConfigurationsXBIOS Features Quick Boot Bootup Num-LockRestore on AC Power Loss Wait For F1 If ErrorPower Button Function PS/2 Mouse SupportAdjacent Cache Line Prefetch Available when supported by the CPU Ratio CMOS SettingHardware Prefetcher Available when supported by the CPU XProcessor & Clock OptionsIntel TurboMode Tech Available if Intel EIST technology is Enabled Intel Virtualization Technology Available when supported by the CPUSimultaneous Multi-Threading Available when supported by the CPU Intel EIST Technology2 ~ 3 - Core Ratio Limit Intel Turbo Boost Configuration Turbo Ratio Limit Program1 - Core Ratio Limit TDC Limit OverrideC-STATE Tech C-State package limit settingXAdvanced Chipset Control C1 Auto DemotionMemory Mode QPI L0s and L1Memory Frequency Demand ScrubbingTemperature Rise High Performance Event TimerInlet Temperature Air FlowIntel I/OAT Active State Power ManagementIntel VT-d USB FunctionsConfigure SATA#1 as XIDE / Floppy ConfigurationSATA#1 Configuration IDE Detect Timeout secBlock Multi-Sector Transfer TypeLBA/Large Mode PIO ModeS.M.A.R.T. For Hard disk drives DMA Mode32Bit Data Transfer Clear NVRAM XPCI/PnP ConfigurationPCI Latency Timer Plug & Play OSRemote Access XSuper IO Device ConfigurationXRemote Access Configuration Serial Port1 Address/ Serial Port2 AddressCPU Overheat Alarm XHardware Health ConfigurationRedirection After BIOS POST Terminal TypeSystem Temperature CPU TemperatureThe item displays the absolute temperature as detected by the BIOS Fan Speed Control Modes XACPI ConfigurationACPI Version Features Fan1 ~ Fan 5 ReadingTPM Enable/Disable Status XIPMI ConfigurationExecute TPM Command XTrusted ComputingSet PEF Configuration Set LAN ConfigurationClear BMC System Event Log BMC WatchDog TimeOut MinSec XEvent Log ConfigurationBMC Watch Dog Timer Action View Event LogUser Password 7-4 Security SettingsSupervisor Password Change Supervisor PasswordChange User Password Boot Sector Virus ProtectionXBoot Device Priority 7-5 Boot SettingsXHard Disk Drives XCD/DVD Drives 7-6 Exit OptionsXRemovable Drives Save Changes and ExitDiscard Changes and Exit Load Optimal DefaultsLoad Fail-Safe Defaults Discard ChangesAppendix A POST Error Beep Codes Recoverable POST Error Beep CodesAppendix B Installing the Windows OS B-1 Installing Windows on RAID SystemsB-2 Installing Windows on Non-RAID Systems Processors Appendix C SpecificationsBIOS ChipsetSystem Input Requirements WeightPower Supply Operating Environment