Canon DR-3010C Names and Functions of Parts, Front View/Right-Side View Operation Panel

Page 10

3. Names and Functions of Parts

This section describes the name and function of each part. Make sure to read this section and familiarize yourself with the parts of the scanner before using the scanner.

Front View/Right-Side View

Operation Panel

Display Panel

Displays the job numbers or the error codes.

Plus Key

Increases the job number on the display panel.

Document Feeder

Document Feed Tray

Attach before placing

Minus Key Start Key

Reduces the job number to

Load the Document. (See p.21.)

documents.

scan on the display panel.

Stop Key

Stops scanning.

Starts the job number to scan on the display panel.

Power Indicator

This indicator lights blue when the scanner is turned ON.

Document Guides

Adjust these guides to fit the width of the document. (See p.22.)

Error Codes Displayed:

: Displayed if the front unit is open.

: Displayed if a paper jam is detected.

: Displayed if a double feed is detected while scanning.

: Displayed if another type of error occurs.

For information resolving error codes, see "An Error Code Is Displayed on the Display Panel," on p.78.

Front View (With the Document Feed Tray and Eject Tray Open)

Back View

		Extension Tray
		Pull this tray out if the
	Front Unit	document hangs over the
	Front Unit	edge of the document feeder.
	Open when clearing paper jams	edge of the document feeder.
	Open when clearing paper jams
	and cleaning the scanner. (See
	p.34 and p.67.)

Theft Prevention Hole (Kensington) Attach a key chain, etc. here to prevent the scanner from being stolen.

Power Switch

Power Connector

Connect the supplied AC adapter to this connector.

Document Eject Area Scanned documents are

output here.

Extension Tray

Pull this tray out if the document hangs over the edge of the document eject tray.

OPEN Button

Use to open the front unit.

Document Eject Tray

Open this tray when you want to stack output documents.

This switch is used to turn the scanner ON and OFF. If you set the switch to ‘AUTO’, the scanner is linked to be automatically turned ON/OFF in accordance with the power of the computer.

USB Connector

Connect a USB cable that supports Hi-Speed USB 2.0 to this connector.

10

DR-3010C

Image 10

Contents Document Scanner Copyright International Energy Star Office Equipment ProgramTrademarks Copyright Canon Electronics INC ALL Rights ReservedIntroduction Maintenance AppendixImportant Safety Instructions Installation Location20% to 80% RH Handling Features of the DR-3010C Document Scanner Disposal„ Folio Scan „ Sleep Mode„ Auto Color Detection „ DeskewNames and Functions of Parts „ Front View/Right-Side View „ Operation Panel„ Feed Selection Lever „ Paper Eject StopperScanner System Requirements Installing the SoftwareTurning the Power on Operating systemsThis section describes how to install the required software Installing the SoftwareSetup Disc Menu Screen Typical Installation Read ManualsFollow the procedure below to install the software Software InstallationTurn the power of the computer on DR-3010C Connecting the Scanner to the Computer Connect the scanner to the computerModel ScannerTurning the Power on Scanner RecognitionDocuments Size Paper weight 140 lb bond 300 g/m2 0.0138 0.35 mm or lessDocument must meet the following criteria to be scannable SizePreparing the Trays Preparing the ScannerPreparing the Document Stopper Placing Documents Feeding in the Page Separation ModeSwitch the feed selection lever to Page Separation So that it is upside downUse the application software to start scanning Switch the feed selection lever to Bypass Feeding in the Bypass ModePlacing Cards Placing Folded Documents Scanning Methods Scanning With CapturePerfectDR-3010C Scanning with the Job Function Job FunctionDR-3010C Scan Panel Functions Using the Scan PanelSpecial Scanning Enhancing the Text of a DocumentScanning Single-Sided 11 x 17/A3 Documents Scanning Different Sized Documents TogetherSkipping Blank Pages Auto Page Size DetectionCorrecting the Text Orientation of Documents Deskewing DocumentsMoire Reduction Deskew Off Deskew OnPractical Examples Registering Settings PrescanDR-3010C Bypass, and scan the documents one at a time Setting the Long Document ModeOther Functions Control Panel Classic ViewDR-3010C Before Using the Scanner Before Using the ScannerISIS/TWAIN Driver Properties Dialog Box Auto Color Detection Scan Mode SettingsMode settings Scanned image is savedMode Auto Color DetectionColor Saturation/Proportion of Color Brightness Paper Size SettingsMode in case of binary ContrastSimplex Scan Resolution SettingsScanning Side Settings DuplexSkip blank Correcting Image SkewingFolio Adjusting the Scan Area Moire ReductionArea Window Scan Area Dialog Box Twain DriverArea MarginUsed the Back Side Brightness Check Box Brightness/Contrast AdjustmentAdjusts the contrast of images to be scanned Used the Back Side Contrast Check BoxGamma Curve Settings Image Contour Adjustment Image RotationText Orientation Detection Abnormally when it is enabledPreventing Bleed Through/Removing the Document Background Omitting a Specific Color Enhancing the Red ColorDouble Feed Detection Rapid System RecoveryDetect by Length Feeding Options When scanning is complete, the Prescan window is displayed PrescanRegistering Scanning Conditions Checking the VersionJob Registration Tool Settings Starting the Job Registration ToolSave as File Print Registered Job List New/Editing Dialog BoxJob Registration Tool Dialog Box Attach to E-mail Close Button„ Job Number No to No Settings Common to Each Function„ Scanner setting „ Job titleSettings to Save Image Files Select Normal to save files with standard compression „ Jpeg File Setting Dialog Box „ Quality„ Compression rate „ Language for OCR„ Printer Setting the LauncherSettings to Print Scanned Images „ Print formatControl Panel Classic View „ Capacity Warning Settings Admin Dialog BoxSettings for Monitoring the Folder for Saved Images Click OKJob Backup Settings Monitor Job Dialog SettingsSetting the Maximum Size of E-Mail Attachments Printing Registered Jobs Cleaning the Inside of the Scanner Regular MaintenanceCleaning the Scanner Regular MaintenanceCleaning the Sensor Glass and the Rollers Open the document eject tray. See p.21Remove the feed roller and retard roller. See p.69 and p.71 Removing/Attaching the Feed Roller Roller Replacement CycleRemoving the Feed Roller Attaching the Feed Roller Removing/Attaching the Retard Roller Removing the Retard RollerAttaching the Retard Roller Removing the Document Holding Guide Removing/Attaching the Document Holding GuideAttaching the Document Holding Guide Resetting the Counter Printers and Other HardwareProblem The scanner is not connected correctly TroubleshootingTroubleshooting Uninstalling the Software ⋅ The Scanner Does Not Turn on⋅ Scanning Is Not Performed ⋅ Slow Scanning Speed⋅ Documents Do Not Feed Properly ⋅ Saved Image Files Do Not Open ⋅ Scanning Results Are Not as ExpectedLocal authorized Canon Dealer, or service representative ⋅ An Error Code Is Displayed on the Display PanelSetting auto-detection of the paper size On p.34Log on to Windows as an Administrator Uninstallin g the SoftwareIf you clicked DR-3010C Job Tool, click Change/Remove Click Finish Uninstalling CapturePerfectClick Yes in the DR-3010C Setup dialog box Complete, click OKRemoving the Document Feed Tray Guide is unsnapped from the document feed traySpecifications SpecificationsSpecifications Main UnitAC Adapter 100 to 240 V type Replacement PartsProduct specifications are subject to change without notice Exchange roller kit product code 3335B001AAExternal Dimensions European Union and EEA only FCC Regulations For 120 V modelRadio Interference Regulations For 120 V models EEA Norway, Iceland and LiechtensteinCleaning Document holding guideSoftware Retard rollerRoller, replacing Special scanning

Related manuals

Manual 4 pages 12.87 Kb