Canon DR-3010C user manual 20% to 80% RH

Page 6

AC Adapter

• Connect only to a power outlet of the rated voltage and power supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region).

• Do not connect other electrical equipment to the same power outlet to which the scanner is connected. Also, when using an extension cord, make sure that the extension cord is rated for the current requirements of the scanner.

• Never disassemble or modify the AC adapter, as it is dangerous.

• The power cord may become damaged if it is often stepped on or if heavy objects are placed on it. Continued use of a damaged power cord and AC adapter can lead to an accident, such as a fire or electrical shock.

• Do not use the power cord while it is coiled.

• Do not pull directly on the power cord. When disconnecting the power cord, grasp the plug and remove it from the outlet.

• Keep the area around the power cord clear of objects so that the power cord can be disconnected easily in an emergency.

• Do not use an AC adapter other than the one provided with the scanner. Do not use the AC adapter provided with the scanner with other products.

Model: MG1-4315

• If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information.

Moving the Scanner

• When moving the scanner, always hold it with both hands to avoid dropping it. The scanner weighs approximately 6.4 lb (2.9 kg).

• Make sure to disconnect the interface cable and AC adapter before moving the scanner. If the scanner is transported with these items connected, the plugs and connectors may be damaged.

DR-3010C

•Avoid exposing the scanner to rapid changes in temperature. If the room in which the scanner is installed is cold but rapidly heated, water droplets (condensation) may form inside the scanner. This may result in a noticeable degradation in scanning quality.

•The following conditions are recommended for optimal scanning quality:

- Room temperature:10°C to 32.5°C (50°F to 90.5°F)

- Humidity:

20% to 80% RH

•Avoid installing the scanner near equipment that generates a magnetic field (e.g. speakers, televisions, or radios.)

6

Image 6

Contents Document Scanner Copyright International Energy Star Office Equipment ProgramTrademarks Copyright Canon Electronics INC ALL Rights ReservedIntroduction Maintenance AppendixImportant Safety Instructions Installation Location20% to 80% RH Handling Features of the DR-3010C Document Scanner Disposal„ Folio Scan „ Sleep Mode„ Auto Color Detection „ DeskewNames and Functions of Parts „ Front View/Right-Side View „ Operation Panel„ Feed Selection Lever „ Paper Eject StopperScanner System Requirements Installing the SoftwareTurning the Power on Operating systemsThis section describes how to install the required software Installing the SoftwareSetup Disc Menu Screen Typical Installation Read ManualsSoftware Installation Follow the procedure below to install the softwareTurn the power of the computer on DR-3010C Connecting the Scanner to the Computer Connect the scanner to the computerModel ScannerTurning the Power on Scanner RecognitionDocuments Size Paper weight 140 lb bond 300 g/m2 0.0138 0.35 mm or lessDocument must meet the following criteria to be scannable SizePreparing the Scanner Preparing the TraysPreparing the Document Stopper Placing Documents Feeding in the Page Separation ModeSwitch the feed selection lever to Page Separation So that it is upside downUse the application software to start scanning Feeding in the Bypass Mode Switch the feed selection lever to BypassPlacing Cards Placing Folded Documents Scanning Methods Scanning With CapturePerfectDR-3010C Scanning with the Job Function Job FunctionDR-3010C Scan Panel Functions Using the Scan PanelSpecial Scanning Enhancing the Text of a DocumentScanning Single-Sided 11 x 17/A3 Documents Scanning Different Sized Documents TogetherSkipping Blank Pages Auto Page Size DetectionCorrecting the Text Orientation of Documents Deskewing DocumentsMoire Reduction Deskew Off Deskew OnPractical Examples Registering Settings PrescanDR-3010C Bypass, and scan the documents one at a time Setting the Long Document ModeOther Functions Control Panel Classic ViewDR-3010C Before Using the Scanner Before Using the ScannerISIS/TWAIN Driver Properties Dialog Box Auto Color Detection Scan Mode SettingsMode settings Scanned image is savedAuto Color Detection ModeColor Saturation/Proportion of Color Brightness Paper Size SettingsMode in case of binary ContrastSimplex Scan Resolution SettingsScanning Side Settings DuplexCorrecting Image Skewing Skip blankFolio Adjusting the Scan Area Moire ReductionArea Window Scan Area Dialog Box Twain DriverArea MarginUsed the Back Side Brightness Check Box Brightness/Contrast AdjustmentAdjusts the contrast of images to be scanned Used the Back Side Contrast Check BoxGamma Curve Settings Image Contour Adjustment Image RotationAbnormally when it is enabled Text Orientation DetectionPreventing Bleed Through/Removing the Document Background Omitting a Specific Color Enhancing the Red ColorRapid System Recovery Double Feed DetectionDetect by Length Feeding Options When scanning is complete, the Prescan window is displayed PrescanRegistering Scanning Conditions Checking the VersionJob Registration Tool Settings Starting the Job Registration ToolSave as File Print Registered Job List New/Editing Dialog BoxJob Registration Tool Dialog Box Attach to E-mail Close Button„ Job Number No to No Settings Common to Each Function„ Scanner setting „ Job titleSettings to Save Image Files Select Normal to save files with standard compression „ Jpeg File Setting Dialog Box „ Quality„ Compression rate „ Language for OCR„ Printer Setting the LauncherSettings to Print Scanned Images „ Print formatControl Panel Classic View „ Capacity Warning Settings Admin Dialog BoxSettings for Monitoring the Folder for Saved Images Click OKMonitor Job Dialog Settings Job Backup SettingsSetting the Maximum Size of E-Mail Attachments Printing Registered Jobs Cleaning the Inside of the Scanner Regular MaintenanceCleaning the Scanner Regular MaintenanceCleaning the Sensor Glass and the Rollers Open the document eject tray. See p.21Remove the feed roller and retard roller. See p.69 and p.71 Roller Replacement Cycle Removing/Attaching the Feed RollerRemoving the Feed Roller Attaching the Feed Roller Removing/Attaching the Retard Roller Removing the Retard RollerAttaching the Retard Roller Removing/Attaching the Document Holding Guide Removing the Document Holding GuideAttaching the Document Holding Guide Resetting the Counter Printers and Other HardwareProblem The scanner is not connected correctly TroubleshootingTroubleshooting Uninstalling the Software ⋅ The Scanner Does Not Turn on⋅ Slow Scanning Speed ⋅ Scanning Is Not Performed⋅ Documents Do Not Feed Properly ⋅ Saved Image Files Do Not Open ⋅ Scanning Results Are Not as ExpectedLocal authorized Canon Dealer, or service representative ⋅ An Error Code Is Displayed on the Display PanelSetting auto-detection of the paper size On p.34Uninstallin g the Software Log on to Windows as an AdministratorIf you clicked DR-3010C Job Tool, click Change/Remove Click Finish Uninstalling CapturePerfectClick Yes in the DR-3010C Setup dialog box Complete, click OKRemoving the Document Feed Tray Guide is unsnapped from the document feed traySpecifications SpecificationsSpecifications Main UnitAC Adapter 100 to 240 V type Replacement PartsProduct specifications are subject to change without notice Exchange roller kit product code 3335B001AAExternal Dimensions European Union and EEA only FCC Regulations For 120 V modelRadio Interference Regulations For 120 V models EEA Norway, Iceland and LiechtensteinCleaning Document holding guideSoftware Retard rollerRoller, replacing Special scanning

Related manuals

Manual 4 pages 12.87 Kb