Canon DR-3010C user manual Replacement Parts, AC Adapter 100 to 240 V type

Page 83

Grayscale Simplex

200 x 200 dpi

30 pages/min.

 

300 x 300 dpi

30 pages/min.

Duplex

200 x 200 dpi

60 images/min.

 

300 x 300 dpi

60 images/min.

24-bit Color Simplex

100 x 100 dpi

30 pages/min.

 

200 x 200 dpi

30 pages/min.

Duplex

100 x 100 dpi

60 images/min.

 

200 x 200 dpi

60 images/min.

Interface

Hi-Speed USB 2.0

Other Functions

Auto document thickness adjustment, folio scanning

External Dimensions

12.2" x 11.5" x 7.8" (W x D x H)

 

310 mm x 292 mm x 197 mm (W x D x H)

Weight (without AC adapter)

Approximately 6.4 lb (2.9 kg).

Power Supply (using AC adapter)

DC 16 V, 1.0 A

 

Power Consumption

Scanning: Maximum 16.5 W

 

In the Sleep mode: Maximum 3.7 W

 

With power switch OFF: Maximum 0.5 W

Noise

Not more than 66 dB

Operating Environment

Temperature: 10°C to 32.5°C (50°F to 90.5°F)

 

Humidity: 20% to 80% RH

AC Adapter (100 to 240 V type)

 

 

 

 

Model Number

MG1-4315

 

Input

AC 100-240 V, 50/60 Hz, 0.65-0.34 A

Output

DC 16 V, 1.8 A

 

Weight

Approximately 0.3 kg (including power cord)

Replacement Parts

Exchange roller kit (product code: 3335B001AA)

For information on replacing the rollers, see "Removing/Attaching the Feed Roller," on p. 69. and "Removing/Attaching the Retard Roller," on p. 71.

For information on replacing the document holding guide, see "Removing/ Attaching the Document Holding Guide," on p. 73.

Contact your local authorized Canon dealer or service representative for detailed information about the replacement parts.Kit to replace the rollers (retard roller, feed roller) and document holding guide.

Product specifications are subject to change without notice.

83

DR-3010C

Image 83
Contents Document Scanner Copyright Canon Electronics INC ALL Rights Reserved International Energy Star Office Equipment ProgramTrademarks CopyrightIntroduction Appendix MaintenanceInstallation Location Important Safety Instructions20% to 80% RH Handling Disposal Features of the DR-3010C Document Scanner„ Deskew „ Sleep Mode„ Auto Color Detection „ Folio Scan„ Front View/Right-Side View „ Operation Panel Names and Functions of Parts„ Paper Eject Stopper „ Feed Selection LeverOperating systems Installing the SoftwareTurning the Power on Scanner System RequirementsMenu Screen Typical Installation Read Manuals Installing the SoftwareSetup Disc This section describes how to install the required softwareTurn the power of the computer on Software InstallationFollow the procedure below to install the software DR-3010C Connect the scanner to the computer Connecting the Scanner to the ComputerScanner ModelScanner Recognition Turning the Power onDocuments Size Paper weight 140 lb bond 300 g/m2 0.0138 0.35 mm or lessDocument must meet the following criteria to be scannable SizePreparing the Document Stopper Preparing the ScannerPreparing the Trays So that it is upside down Feeding in the Page Separation ModeSwitch the feed selection lever to Page Separation Placing DocumentsUse the application software to start scanning Placing Cards Feeding in the Bypass ModeSwitch the feed selection lever to Bypass Placing Folded Documents Scanning With CapturePerfect Scanning MethodsDR-3010C Job Function Scanning with the Job FunctionDR-3010C Enhancing the Text of a Document Using the Scan PanelSpecial Scanning Scan Panel FunctionsAuto Page Size Detection Scanning Different Sized Documents TogetherSkipping Blank Pages Scanning Single-Sided 11 x 17/A3 DocumentsDeskew Off Deskew On Deskewing DocumentsMoire Reduction Correcting the Text Orientation of DocumentsPractical Examples Prescan Registering SettingsDR-3010C Control Panel Classic View Setting the Long Document ModeOther Functions Bypass, and scan the documents one at a timeDR-3010C Before Using the Scanner Before Using the ScannerISIS/TWAIN Driver Properties Dialog Box Scanned image is saved Scan Mode SettingsMode settings Auto Color DetectionColor Saturation/Proportion of Color Auto Color DetectionMode Contrast Paper Size SettingsMode in case of binary BrightnessDuplex Scan Resolution SettingsScanning Side Settings SimplexFolio Correcting Image SkewingSkip blank Moire Reduction Adjusting the Scan AreaMargin Scan Area Dialog Box Twain DriverArea Area WindowUsed the Back Side Contrast Check Box Brightness/Contrast AdjustmentAdjusts the contrast of images to be scanned Used the Back Side Brightness Check BoxGamma Curve Settings Image Rotation Image Contour AdjustmentPreventing Bleed Through/Removing the Document Background Abnormally when it is enabledText Orientation Detection Enhancing the Red Color Omitting a Specific ColorDetect by Length Rapid System RecoveryDouble Feed Detection Feeding Options Prescan When scanning is complete, the Prescan window is displayedChecking the Version Registering Scanning ConditionsStarting the Job Registration Tool Job Registration Tool SettingsAttach to E-mail Close Button New/Editing Dialog BoxJob Registration Tool Dialog Box Save as File Print Registered Job List„ Job title Settings Common to Each Function„ Scanner setting „ Job Number No to NoSettings to Save Image Files „ Language for OCR „ Jpeg File Setting Dialog Box „ Quality„ Compression rate Select Normal to save files with standard compression„ Print format Setting the LauncherSettings to Print Scanned Images „ PrinterControl Panel Classic View Click OK Admin Dialog BoxSettings for Monitoring the Folder for Saved Images „ Capacity Warning SettingsSetting the Maximum Size of E-Mail Attachments Monitor Job Dialog SettingsJob Backup Settings Printing Registered Jobs Regular Maintenance Regular MaintenanceCleaning the Scanner Cleaning the Inside of the ScannerOpen the document eject tray. See p.21 Cleaning the Sensor Glass and the RollersRemove the feed roller and retard roller. See p.69 and p.71 Removing the Feed Roller Roller Replacement CycleRemoving/Attaching the Feed Roller Attaching the Feed Roller Removing the Retard Roller Removing/Attaching the Retard RollerAttaching the Retard Roller Attaching the Document Holding Guide Removing/Attaching the Document Holding GuideRemoving the Document Holding Guide Printers and Other Hardware Resetting the Counter⋅ The Scanner Does Not Turn on TroubleshootingTroubleshooting Uninstalling the Software Problem The scanner is not connected correctly⋅ Documents Do Not Feed Properly ⋅ Slow Scanning Speed⋅ Scanning Is Not Performed ⋅ Scanning Results Are Not as Expected ⋅ Saved Image Files Do Not OpenOn p.34 ⋅ An Error Code Is Displayed on the Display PanelSetting auto-detection of the paper size Local authorized Canon Dealer, or service representativeIf you clicked DR-3010C Job Tool, click Change/Remove Uninstallin g the SoftwareLog on to Windows as an Administrator Complete, click OK Uninstalling CapturePerfectClick Yes in the DR-3010C Setup dialog box Click FinishGuide is unsnapped from the document feed tray Removing the Document Feed TrayMain Unit SpecificationsSpecifications SpecificationsExchange roller kit product code 3335B001AA Replacement PartsProduct specifications are subject to change without notice AC Adapter 100 to 240 V typeExternal Dimensions EEA Norway, Iceland and Liechtenstein FCC Regulations For 120 V modelRadio Interference Regulations For 120 V models European Union and EEA onlyDocument holding guide CleaningSpecial scanning Retard rollerRoller, replacing Software
Related manuals
Manual 4 pages 12.87 Kb