3 | Open the roller cover inside the front unit using your finger. |
4 | Lift up the roller fixing lever (c), and slide it to the right (d). |
b | |
| a |
Attaching the Retard Roller
1Insert the retard roller into the slot inside the roller cover, and align the notch on the roller with the shaft on the front unit.
2Slide the roller fixing lever to the left to lock the roller into the hole on the left of the retard roller.
5Remove the retard roller by moving it to the right to detach it from its shaft, and pull it out.
3 Push down the lever to lock the shaft of the feed roller into place. |
72 |
|