Canon DR-3010C Installing the Software, Setup Disc, Menu Screen Typical Installation Read Manuals

Page 13

IMPORTANT

If you do not know the requirements for your computer system, contact the store where you purchased the computer or the manufacturer of the computer for more information.

Use the latest USB 2.0 driver made available by Microsoft. For details, contact your local authorized Canon dealer.

Use the USB interface provided as standard with your computer. However, normal operation is not guaranteed with all USB interfaces, even if present as standard equipment on the computer. For details, contact your local authorized Canon dealer.

Scanning speeds are lower if your computer's standard USB interface is USB

Full-Speed (equal to USB 1.1).

The USB cable you are using should be the one originally included with the scanner.

If the CPU, memory, interface card, and other specifications do not satisfy the installation requirements, the scanning speed may be greatly reduced and transmission may take a long time.

Even if the computer satisfies the recommended specifications, the scanning speed may vary, depending on the specified scan settings.

The ISIS/TWAIN drivers provided with the scanner do not necessarily operate on all ISIS or TWAIN-compatible applications. For details, contact your application software retailer.

2. Installing the Software

This section describes how to install the required software.

Setup Disc

The following software is included on the DR-3010C Setup disc.

DR-3010C Driver/Job Registration Tool

The scanner driver for using the DR-3010C and the tool to register/set jobs.

CapturePerfect 3.0

An ISIS compatible application developed for use with Canon document scanners.

NOTE

The Setup disc of the DR-3010C is configured as follows. Install the software using either Typical Installation or Custom Installation.

Menu Screen

Typical Installation

Read Manuals

Custom Installation

13

DR-3010C

Image 13
Contents Document Scanner Trademarks International Energy Star Office Equipment ProgramCopyright Copyright Canon Electronics INC ALL Rights ReservedIntroduction Appendix MaintenanceInstallation Location Important Safety Instructions20% to 80% RH Handling Disposal Features of the DR-3010C Document Scanner„ Auto Color Detection „ Sleep Mode„ Folio Scan „ Deskew„ Front View/Right-Side View „ Operation Panel Names and Functions of Parts„ Paper Eject Stopper „ Feed Selection LeverTurning the Power on Installing the SoftwareScanner System Requirements Operating systemsSetup Disc Installing the SoftwareThis section describes how to install the required software Menu Screen Typical Installation Read ManualsFollow the procedure below to install the software Software InstallationTurn the power of the computer on DR-3010C Connect the scanner to the computer Connecting the Scanner to the ComputerScanner ModelScanner Recognition Turning the Power onDocuments Document must meet the following criteria to be scannable Paper weight 140 lb bond 300 g/m2 0.0138 0.35 mm or lessSize SizePreparing the Trays Preparing the ScannerPreparing the Document Stopper Switch the feed selection lever to Page Separation Feeding in the Page Separation ModePlacing Documents So that it is upside downUse the application software to start scanning Switch the feed selection lever to Bypass Feeding in the Bypass ModePlacing Cards Placing Folded Documents Scanning With CapturePerfect Scanning MethodsDR-3010C Job Function Scanning with the Job FunctionDR-3010C Special Scanning Using the Scan PanelScan Panel Functions Enhancing the Text of a DocumentSkipping Blank Pages Scanning Different Sized Documents TogetherScanning Single-Sided 11 x 17/A3 Documents Auto Page Size DetectionMoire Reduction Deskewing DocumentsCorrecting the Text Orientation of Documents Deskew Off Deskew OnPractical Examples Prescan Registering SettingsDR-3010C Other Functions Setting the Long Document ModeBypass, and scan the documents one at a time Control Panel Classic ViewDR-3010C Before Using the Scanner Before Using the ScannerISIS/TWAIN Driver Properties Dialog Box Mode settings Scan Mode SettingsAuto Color Detection Scanned image is savedMode Auto Color DetectionColor Saturation/Proportion of Color Mode in case of binary Paper Size SettingsBrightness ContrastScanning Side Settings Scan Resolution SettingsSimplex DuplexSkip blank Correcting Image SkewingFolio Moire Reduction Adjusting the Scan AreaArea Scan Area Dialog Box Twain DriverArea Window MarginAdjusts the contrast of images to be scanned Brightness/Contrast AdjustmentUsed the Back Side Brightness Check Box Used the Back Side Contrast Check BoxGamma Curve Settings Image Rotation Image Contour AdjustmentText Orientation Detection Abnormally when it is enabledPreventing Bleed Through/Removing the Document Background Enhancing the Red Color Omitting a Specific ColorDouble Feed Detection Rapid System RecoveryDetect by Length Feeding Options Prescan When scanning is complete, the Prescan window is displayedChecking the Version Registering Scanning ConditionsStarting the Job Registration Tool Job Registration Tool SettingsJob Registration Tool Dialog Box New/Editing Dialog BoxSave as File Print Registered Job List Attach to E-mail Close Button„ Scanner setting Settings Common to Each Function„ Job Number No to No „ Job titleSettings to Save Image Files „ Compression rate „ Jpeg File Setting Dialog Box „ QualitySelect Normal to save files with standard compression „ Language for OCRSettings to Print Scanned Images Setting the Launcher„ Printer „ Print formatControl Panel Classic View Settings for Monitoring the Folder for Saved Images Admin Dialog Box„ Capacity Warning Settings Click OKJob Backup Settings Monitor Job Dialog SettingsSetting the Maximum Size of E-Mail Attachments Printing Registered Jobs Cleaning the Scanner Regular MaintenanceCleaning the Inside of the Scanner Regular MaintenanceOpen the document eject tray. See p.21 Cleaning the Sensor Glass and the RollersRemove the feed roller and retard roller. See p.69 and p.71 Removing/Attaching the Feed Roller Roller Replacement CycleRemoving the Feed Roller Attaching the Feed Roller Removing the Retard Roller Removing/Attaching the Retard RollerAttaching the Retard Roller Removing the Document Holding Guide Removing/Attaching the Document Holding GuideAttaching the Document Holding Guide Printers and Other Hardware Resetting the CounterTroubleshooting Uninstalling the Software TroubleshootingProblem The scanner is not connected correctly ⋅ The Scanner Does Not Turn on⋅ Scanning Is Not Performed ⋅ Slow Scanning Speed⋅ Documents Do Not Feed Properly ⋅ Scanning Results Are Not as Expected ⋅ Saved Image Files Do Not OpenSetting auto-detection of the paper size ⋅ An Error Code Is Displayed on the Display PanelLocal authorized Canon Dealer, or service representative On p.34Log on to Windows as an Administrator Uninstallin g the SoftwareIf you clicked DR-3010C Job Tool, click Change/Remove Click Yes in the DR-3010C Setup dialog box Uninstalling CapturePerfectClick Finish Complete, click OKGuide is unsnapped from the document feed tray Removing the Document Feed TraySpecifications SpecificationsSpecifications Main UnitProduct specifications are subject to change without notice Replacement PartsAC Adapter 100 to 240 V type Exchange roller kit product code 3335B001AAExternal Dimensions Radio Interference Regulations For 120 V models FCC Regulations For 120 V modelEuropean Union and EEA only EEA Norway, Iceland and LiechtensteinDocument holding guide CleaningRoller, replacing Retard rollerSoftware Special scanning
Related manuals
Manual 4 pages 12.87 Kb