Canon DR-3010C user manual Handling

Page 7

Handling

WARNING

Note the following precautions whenever using the scanner. Failure to do so may result in a fire or electric shock.

•Never use alcohol, benzene, paint thinner, aerosol sprays, or any other highly flammable substance near the scanner.

•Do not cut, damage, or modify the power cord. Do not place heavy objects on the power cord, and do not pull or excessively bend the power cord.

•Never connect the power cord when your hands are wet.

•Do not connect the scanner to a multiplug power strip.

•Do not knot or coil the power cord as this may result in a fire or electric shock. When connecting the power cord, make sure that the power plug is securely and completely inserted into the power outlet.

•Do not use a power cord or AC adapter other than the ones provided with this scanner.

•Do not take the scanner apart or modify it.

•Never try to take the AC adapter apart or modify it in any way, as this is dangerous.

•When cleaning the scanner, turn the power switch OFF and disconnect the power cord from the power supply.

•Clean the scanner using a slightly dampened cloth which has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances.

•If the scanner makes strange noises, or gives off smoke, heat, or strange odors, or the scanner does not function or other abnormalities occur when you use the machine, immediately turn the power switch OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative for further information.

•Do not drop the scanner, or subject it to impact or strong shock. Should the scanner ever become damaged, immediately turn the power switch OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced.

•Before moving the scanner, be sure to turn the power switch OFF, and disconnect the power plug from the power outlet.

CAUTION

•Do not install the scanner on a surface that is unstable or tilted, or in an area subject to excessive vibrations, as this may cause the scanner to fall, resulting in personal injury or damage to the scanner.

•Never place small metal objects such as staples, paper clips, or jewelry on the scanner. These items may fall into the scanner, and cause a fire or electric shock. Should such objects ever fall inside the scanner, immediately turn the power switch OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced.

•Do not install the scanner in a humid or dusty location. Doing so might cause a fire or electric shock.

•Do not place objects on top of the scanner. Such objects may tip or fall over, resulting in personal injury.

•Connect only to a power outlet of the rated voltage and power supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region).

•When unplugging the power cord, grasp it firmly by its plug. Do not pull directly on the power cord, as this may damage or expose the cord's internal wiring, resulting in a fire or electric shock.

•Leave sufficient space around the power plug so that it can be unplugged easily. If objects are placed around the power plug, you will be unable to unplug it in an emergency.

•Do not allow water or flammable substances (alcohol, paint thinner, benzene, etc.) to spill into the scanner, as this may result in a fire or electric shock.

•Turn OFF the power switch for safety when not using the scanner for a long period of time, such as overnight. Also, turn OFF the power switch, and disconnect the power cord from the power outlet for safety when the machine will not be used for an extended period of time, such as during consecutive holidays.

•Do not wear loose clothing or jewelry that may get caught in the scanner while you are using it. This may result in personal injury. Be extra careful of neckties and long hair. If anything becomes caught in the scanner, immediately disconnect the power cord to stop the scanner.

•Be careful when loading paper into the scanner and when removing jammed paper. It is possible to cut your hand on the edge of a sheet of paper.

7

DR-3010C

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Document Scanner Copyright Canon Electronics INC ALL Rights Reserved International Energy Star Office Equipment ProgramTrademarks CopyrightIntroduction Appendix MaintenanceInstallation Location Important Safety Instructions20% to 80% RH Handling Disposal Features of the DR-3010C Document Scanner„ Deskew „ Sleep Mode„ Auto Color Detection „ Folio Scan„ Front View/Right-Side View „ Operation Panel Names and Functions of Parts„ Paper Eject Stopper „ Feed Selection LeverOperating systems Installing the SoftwareTurning the Power on Scanner System RequirementsMenu Screen Typical Installation Read Manuals Installing the SoftwareSetup Disc This section describes how to install the required softwareFollow the procedure below to install the software Software InstallationTurn the power of the computer on DR-3010C Connect the scanner to the computer Connecting the Scanner to the ComputerScanner ModelScanner Recognition Turning the Power onDocuments Size Paper weight 140 lb bond 300 g/m2 0.0138 0.35 mm or lessDocument must meet the following criteria to be scannable SizePreparing the Trays Preparing the ScannerPreparing the Document Stopper So that it is upside down Feeding in the Page Separation ModeSwitch the feed selection lever to Page Separation Placing DocumentsUse the application software to start scanning Switch the feed selection lever to Bypass Feeding in the Bypass ModePlacing Cards Placing Folded Documents Scanning With CapturePerfect Scanning MethodsDR-3010C Job Function Scanning with the Job FunctionDR-3010C Enhancing the Text of a Document Using the Scan PanelSpecial Scanning Scan Panel FunctionsAuto Page Size Detection Scanning Different Sized Documents TogetherSkipping Blank Pages Scanning Single-Sided 11 x 17/A3 DocumentsDeskew Off Deskew On Deskewing DocumentsMoire Reduction Correcting the Text Orientation of DocumentsPractical Examples Prescan Registering SettingsDR-3010C Control Panel Classic View Setting the Long Document ModeOther Functions Bypass, and scan the documents one at a timeDR-3010C Before Using the Scanner Before Using the ScannerISIS/TWAIN Driver Properties Dialog Box Scanned image is saved Scan Mode SettingsMode settings Auto Color DetectionMode Auto Color DetectionColor Saturation/Proportion of Color Contrast Paper Size SettingsMode in case of binary BrightnessDuplex Scan Resolution SettingsScanning Side Settings SimplexSkip blank Correcting Image SkewingFolio Moire Reduction Adjusting the Scan AreaMargin Scan Area Dialog Box Twain DriverArea Area WindowUsed the Back Side Contrast Check Box Brightness/Contrast AdjustmentAdjusts the contrast of images to be scanned Used the Back Side Brightness Check BoxGamma Curve Settings Image Rotation Image Contour AdjustmentText Orientation Detection Abnormally when it is enabledPreventing Bleed Through/Removing the Document Background Enhancing the Red Color Omitting a Specific ColorDouble Feed Detection Rapid System RecoveryDetect by Length Feeding Options Prescan When scanning is complete, the Prescan window is displayedChecking the Version Registering Scanning ConditionsStarting the Job Registration Tool Job Registration Tool SettingsAttach to E-mail Close Button New/Editing Dialog BoxJob Registration Tool Dialog Box Save as File Print Registered Job List„ Job title Settings Common to Each Function„ Scanner setting „ Job Number No to NoSettings to Save Image Files „ Language for OCR „ Jpeg File Setting Dialog Box „ Quality„ Compression rate Select Normal to save files with standard compression„ Print format Setting the LauncherSettings to Print Scanned Images „ PrinterControl Panel Classic View Click OK Admin Dialog BoxSettings for Monitoring the Folder for Saved Images „ Capacity Warning SettingsJob Backup Settings Monitor Job Dialog SettingsSetting the Maximum Size of E-Mail Attachments Printing Registered Jobs Regular Maintenance Regular MaintenanceCleaning the Scanner Cleaning the Inside of the ScannerOpen the document eject tray. See p.21 Cleaning the Sensor Glass and the RollersRemove the feed roller and retard roller. See p.69 and p.71 Removing/Attaching the Feed Roller Roller Replacement CycleRemoving the Feed Roller Attaching the Feed Roller Removing the Retard Roller Removing/Attaching the Retard RollerAttaching the Retard Roller Removing the Document Holding Guide Removing/Attaching the Document Holding GuideAttaching the Document Holding Guide Printers and Other Hardware Resetting the Counter⋅ The Scanner Does Not Turn on TroubleshootingTroubleshooting Uninstalling the Software Problem The scanner is not connected correctly⋅ Scanning Is Not Performed ⋅ Slow Scanning Speed⋅ Documents Do Not Feed Properly ⋅ Scanning Results Are Not as Expected ⋅ Saved Image Files Do Not OpenOn p.34 ⋅ An Error Code Is Displayed on the Display PanelSetting auto-detection of the paper size Local authorized Canon Dealer, or service representativeLog on to Windows as an Administrator Uninstallin g the SoftwareIf you clicked DR-3010C Job Tool, click Change/Remove Complete, click OK Uninstalling CapturePerfectClick Yes in the DR-3010C Setup dialog box Click FinishGuide is unsnapped from the document feed tray Removing the Document Feed TrayMain Unit SpecificationsSpecifications SpecificationsExchange roller kit product code 3335B001AA Replacement PartsProduct specifications are subject to change without notice AC Adapter 100 to 240 V typeExternal Dimensions EEA Norway, Iceland and Liechtenstein FCC Regulations For 120 V modelRadio Interference Regulations For 120 V models European Union and EEA onlyDocument holding guide CleaningSpecial scanning Retard rollerRoller, replacing Software
Related manuals
Manual 4 pages 12.87 Kb
Top Page Image Contents