Canon DR-3010C user manual Correcting Image Skewing, Skip blank, Folio

-[Skip blank page]

As each document page is scanned, the scanner detects whether it is blank, and if so, the image is not saved.

y Selecting [Skip blank page] enables the [Setting] button, which opens the Blank Skip Setting dialog box.

y Adjust the Content density setting in the Blank Skip Setting dialog box if blank pages are not skipped, or if non-blank pages are skipped.

yThe Content density setting should be adjusted according to the document content, so that only blank pages are skipped: increase the setting if they are not skipped, and decrease the setting if non-blank pages are skipped.

yThe Skip Blank Pages function may not work properly if the Custom setting is enabled in the Gamma Settings dialog box.

yIf a scanning side setting (simplex or duplex) is specified in the application settings, select [Simplex].

-[Folio]

Documents that are normally folded in half are scanned on both sides and composed into one image.

yYou cannot select [Folio] if you click [Patchcode] from the Batch Separation drop-down list in the [Others] tab.

Correcting Image Skewing

This section describes the procedure for setting the scanner to detect slanted document pages and straighten the scanned images.

1Click the [Basic] tab in the Properties for Canon DR-3010C dialog box → select the [Deskew] check box → click [OK].

NOTE

Deskewing may not work properly, or cause part of the image to be lost, depending on the document.

44 DR-3010C