Canon DR-3010C Other Functions, Setting the Long Document Mode, Control Panel Classic View

Page 36

7. Other Functions

Setting the Long Document Mode

The length of documents that can be scanned with the DR-3010C is normally 14.02" (356 mm), but you can scan documents up to 39.2" (1,000 mm) long by setting the scanner to the Long Document mode.

IMPORTANT

When scanning in the Long Document mode, click the [Basic] tab in the Properties for Canon DR-3010C dialog box select [Auto-detection] from the Page Size drop-down list click [OK]. This allows the scanner to detect and scan documents up to 39.2" (1,000 mm) long. Note the following when using the Long Document mode:

When scanning long documents, make sure to set the feed selection lever to

(Bypass), and scan the documents one at a time.

When scanning in the Long Document mode, if the document is placed on the scanner in a skewed position, it may hit the edges of the feeding area and be damaged. Be careful to place the document so that it is not skewed.

When scanning in the Long Document mode, paper jam detection may react slowly, resulting in damage to the document. Be careful to avoid paper jams.

1From the Windows task bar, click [Start] [Control Panel].

2If the Control Panel is displayed with the Category View, click [Printers and Other Hardware] in the working field click [Scanners and Cameras].

If the Control Panel is displayed with the Classic View, double-click [Scanners and Cameras].

Control Panel (Category View)

Printers and Other Hardware

 

 

 

 

 

 

Control Panel (Classic View)

3Right-click [CANON DR-3010C USB] click [Properties].

36

DR-3010C

Image 36
Contents Document Scanner International Energy Star Office Equipment Program TrademarksCopyright Copyright Canon Electronics INC ALL Rights ReservedIntroduction Maintenance AppendixImportant Safety Instructions Installation Location20% to 80% RH Handling Features of the DR-3010C Document Scanner Disposal„ Sleep Mode „ Auto Color Detection„ Folio Scan „ DeskewNames and Functions of Parts „ Front View/Right-Side View „ Operation Panel„ Feed Selection Lever „ Paper Eject StopperInstalling the Software Turning the Power onScanner System Requirements Operating systemsInstalling the Software Setup DiscThis section describes how to install the required software Menu Screen Typical Installation Read ManualsSoftware Installation Follow the procedure below to install the softwareTurn the power of the computer on DR-3010C Connecting the Scanner to the Computer Connect the scanner to the computerModel ScannerTurning the Power on Scanner RecognitionDocuments Paper weight 140 lb bond 300 g/m2 0.0138 0.35 mm or less Document must meet the following criteria to be scannableSize SizePreparing the Scanner Preparing the TraysPreparing the Document Stopper Feeding in the Page Separation Mode Switch the feed selection lever to Page SeparationPlacing Documents So that it is upside downUse the application software to start scanning Feeding in the Bypass Mode Switch the feed selection lever to BypassPlacing Cards Placing Folded Documents Scanning Methods Scanning With CapturePerfectDR-3010C Scanning with the Job Function Job FunctionDR-3010C Using the Scan Panel Special ScanningScan Panel Functions Enhancing the Text of a DocumentScanning Different Sized Documents Together Skipping Blank PagesScanning Single-Sided 11 x 17/A3 Documents Auto Page Size DetectionDeskewing Documents Moire ReductionCorrecting the Text Orientation of Documents Deskew Off Deskew OnPractical Examples Registering Settings PrescanDR-3010C Setting the Long Document Mode Other FunctionsBypass, and scan the documents one at a time Control Panel Classic ViewDR-3010C Before Using the Scanner Before Using the ScannerISIS/TWAIN Driver Properties Dialog Box Scan Mode Settings Mode settingsAuto Color Detection Scanned image is savedAuto Color Detection ModeColor Saturation/Proportion of Color Paper Size Settings Mode in case of binaryBrightness ContrastScan Resolution Settings Scanning Side SettingsSimplex DuplexCorrecting Image Skewing Skip blankFolio Adjusting the Scan Area Moire ReductionScan Area Dialog Box Twain Driver AreaArea Window MarginBrightness/Contrast Adjustment Adjusts the contrast of images to be scannedUsed the Back Side Brightness Check Box Used the Back Side Contrast Check BoxGamma Curve Settings Image Contour Adjustment Image RotationAbnormally when it is enabled Text Orientation DetectionPreventing Bleed Through/Removing the Document Background Omitting a Specific Color Enhancing the Red ColorRapid System Recovery Double Feed DetectionDetect by Length Feeding Options When scanning is complete, the Prescan window is displayed PrescanRegistering Scanning Conditions Checking the VersionJob Registration Tool Settings Starting the Job Registration ToolNew/Editing Dialog Box Job Registration Tool Dialog BoxSave as File Print Registered Job List Attach to E-mail Close ButtonSettings Common to Each Function „ Scanner setting„ Job Number No to No „ Job titleSettings to Save Image Files „ Jpeg File Setting Dialog Box „ Quality „ Compression rateSelect Normal to save files with standard compression „ Language for OCRSetting the Launcher Settings to Print Scanned Images„ Printer „ Print formatControl Panel Classic View Admin Dialog Box Settings for Monitoring the Folder for Saved Images„ Capacity Warning Settings Click OKMonitor Job Dialog Settings Job Backup SettingsSetting the Maximum Size of E-Mail Attachments Printing Registered Jobs Regular Maintenance Cleaning the ScannerCleaning the Inside of the Scanner Regular MaintenanceCleaning the Sensor Glass and the Rollers Open the document eject tray. See p.21Remove the feed roller and retard roller. See p.69 and p.71 Roller Replacement Cycle Removing/Attaching the Feed RollerRemoving the Feed Roller Attaching the Feed Roller Removing/Attaching the Retard Roller Removing the Retard RollerAttaching the Retard Roller Removing/Attaching the Document Holding Guide Removing the Document Holding GuideAttaching the Document Holding Guide Resetting the Counter Printers and Other HardwareTroubleshooting Troubleshooting Uninstalling the SoftwareProblem The scanner is not connected correctly ⋅ The Scanner Does Not Turn on⋅ Slow Scanning Speed ⋅ Scanning Is Not Performed⋅ Documents Do Not Feed Properly ⋅ Saved Image Files Do Not Open ⋅ Scanning Results Are Not as Expected⋅ An Error Code Is Displayed on the Display Panel Setting auto-detection of the paper sizeLocal authorized Canon Dealer, or service representative On p.34Uninstallin g the Software Log on to Windows as an AdministratorIf you clicked DR-3010C Job Tool, click Change/Remove Uninstalling CapturePerfect Click Yes in the DR-3010C Setup dialog boxClick Finish Complete, click OKRemoving the Document Feed Tray Guide is unsnapped from the document feed traySpecifications SpecificationsSpecifications Main UnitReplacement Parts Product specifications are subject to change without noticeAC Adapter 100 to 240 V type Exchange roller kit product code 3335B001AAExternal Dimensions FCC Regulations For 120 V model Radio Interference Regulations For 120 V modelsEuropean Union and EEA only EEA Norway, Iceland and LiechtensteinCleaning Document holding guideRetard roller Roller, replacingSoftware Special scanning
Related manuals
Manual 4 pages 12.87 Kb