Brother WL660 manual System Requirements, Features, Dpi Resolution and 6 ppm Printing Speed

English

CHAPTER 1 INTRODUCTION

System Requirements

Check the following system requirements to setup and operate the printer:

∙IBM PC or compatible with 80486 SX or higher microprocessor

∙Parallel interface (or printer port)

∙4 MB or more of memory

∙10 MB of space available on your hard disk for the printer driver and all fonts

∙Microsoft Windows 3.1/3.11

☛Caution

This printer has been designed specially for Windows 3.1. It cannot work in a DOS environment, such as MS-DOS.

Features

This printer has the following features:

❏600 dpi Resolution and 6 ppm Printing Speed

600 dots per inch (dpi) with microfine toner and six pages per minute (ppm) printing speed (A4 or Letter size paper).

❏User-Friendly Operation for Windows

The dedicated printer driver and TrueType™-compatible fonts for Microsoft® Windows 3.1 are available on the floppy disk supplied

with your printer. You can easily install them into your Windows system using our installer program. The driver supports our unique compression mode to enhance printing speed in Windows applications and allows you to set various printer settings including toner savings mode, custom paper size, sleep mode, gray scale adjustment, resolution and so forth. You can easily set these print options in the graphic dialog boxes through Printer Setup within Windows Control Panel.

❏Printer Status Monitor with Bi-directional Parallel Interface The printer driver can monitor your printer’s status using bi- directional parallel communications.

The program can show the current status of your printer. When printing, the animated dialog box appears on your computer screen to show the current printing process. If an error occurs, a dialog box will appear to let you know what to correct. For example: when your printer is out of paper, the dialog box will display “Paper Empty” and instructions for the corrective action to take.

1–3