English
USER’S GUIDE
READY↔SLEEP Switch
This printer has a READY↔SLEEP switch on the control panel.
Fig. 3-2 Switch on Control Panel
✒Note
∙This printer has no power switch. You just plug the power cord into the AC outlet. The sleep mode feature controls all power.
∙If a recoverable error, such as cover open or paper empty should occur, take the appropriate action to correct it. The printer should automatically recover from the error without unplugging the printer.
The READY↔SLEEP switch can work in two ways: to enter sleep mode or to print a test page.
Sleep Mode
Sleep mode causes the printer to act as though it has been turned off. While the printer is in sleep mode, all the lamps are off, however the printer can still receive data from the computer.
If you press the READY↔SLEEP switch when the Ready light is a solid green, the printer enters sleep mode.
If you press the READY↔SLEEP switch during printing, the printer immediately stops printing, even if it has started a print job. It ejects the page, then enters sleep mode.
☛Caution
Remember that the READY↔SLEEP switch clears data from the printer memory and puts the printer into sleep mode.