Brother WL660 manual Loading Paper into the Feeder, Opening the Feeder Loading Paper or Envelopes

English

CHAPTER 2 PAPER HANDLING

Loading Paper into the Feeder

To load paper into the feeder, follow these steps.

1.Open the multi-purpose sheet feeder. ( ➀ )

2.Load paper into the multi-purpose sheet feeder with the printing surface face down. ( ➁ )

☛Caution

∙The feeder can hold up to 200 sheets of plain paper. If you load too many sheets, paper jams might occur.

∙Make sure that the paper is stacked below the ▼ mark.

∙If there is still some paper in the feeder, you must first remove it, put it together with the new paper and then insert the stack into the feeder.

Fig. 2-4 Opening the Feeder and

Loading Paper or Envelopes

✒Note

If you load envelopes in the feeder, make sure they are inserted in the direction shown above with the flap on the left side.

2–5