Brother WL660 manual Paper Handling, Printing, Questions Recommendations

English

USER’S GUIDE

Paper Handling

	Questions	Recommendations
	The printer does not load	∙ Check to see if the “Paper Empty” message
	paper.	appears on your computer screen or the
		ALARM lamp is blinking on the printer
		control panel. If so, the multi-purpose sheet
		feeder may be out of paper or not properly
		installed. If it is empty, load a new stack of
		paper into the feeder.
		∙ If there is paper in the multi-purpose sheet
		feeder, make sure it is straight. If the paper is
		curled, you should straighten it before
		printing. Sometimes it is helpful to remove
		the paper, turn the stack over and replace it
		in the paper tray.
		∙ Reduce the stack of paper in the multi-
		purpose sheet feeder, then try again.
	The printer does not load	Re-insert the paper firmly, one sheet at a time.
	paper from the manual
	feed slot.
	How can I load	You can load envelopes from either the multi-
	envelopes?	purpose sheet feeder or the manual feed slot.
		Your application software must be set up
		correctly to print on the envelope size you are
		using. This is usually done in the page setup or
		document setup menu of your software. Refer to
		your application user's guide for instructions.
	What kind of paper can I	You can use plain paper, envelopes,
	use?	transparencies, labels, and organizer paper. For
		information on loading paper, see “Paper
		Handling” in Chapter 2.
	How can I clear paper	See “PAPER JAMS” in this chapter.
	jams?
Printing

Questions

Sometimes I get a Print Overrun error when printing certain documents from Windows.

Recommendations

∙Turn error recovery operation on in the Setup dialog box and try again.

∙Reduce the print resolution or reduce the complexity of your document and try again.

∙Expand the printer memory by installing one of the optional memory boards.

6–8