English
CHAPTER 1 INTRODUCTION
OPERATING AND STORAGE ENVIRONMENT
Please take note of the following before using the printer:
Power Supply
Use the printer within the specified power range.
AC power: ±10% of the rated power voltage in your district
Frequency: 50 Hz (220 V– 240 V) or 60 Hz
The power cord, including extensions, should not exceed 5 meters (16.5 feet).
Do not share the same power circuit with other
Use a voltage regulator if the power source is not stable.
Environment
The printer should be installed near a power outlet, which is easily accessible.
Use the printer only within the following ranges of temperature and
humidity: |
|
Ambient temperature: | 10°C to 32.5°C (59°F to 90.5°F) |
Ambient humidity: | 20% to 80% (without condensation) |
Ventilate the room where you use the printer.
Place the printer on a flat, horizontal surface.
Keep the printer clean. Do not place the printer in a dusty place.
Do not block the ventilation hole of the printer.
Do not place the printer where it is exposed to direct sunlight. Use a blind or heavy curtain to protect the printer from direct sunlight when the printer is unavoidably set up near a window.
Do not place the printer near devices that contain magnets or generate magnetic fields.
Do not subject the printer to strong physical shocks or vibrations.
Do not expose the printer to open flames or salty or corrosive gasses.
Do not place objects on top of the printer.
Do not place the printer near an air conditioner.
Keep the printer horizontal when carrying.