English
CHAPTER 2 PAPER HANDLING
OUTPUT TRAY AND PAPER SUPPORT WIRE
The printer ejects paper with the printed surface face down into the output tray at the front of the printer.
When the output tray is closed, the ejected paper comes out sheet by sheet through the slit in front. When you open the tray, sheets can be stacked on it.
Follow these steps to open the output tray:
1.Pull the top of the tray down.
2.Extend the paper support wire.
Fig. 2-8 Opening the Output Tray and
Extending the Paper Support Wire
You can stack up to 100 sheets in the output tray.
☛Caution
∙When you use transparencies, remove each sheet immediately after printing. Stacking sheets may cause toner to smear onto the back of the previous sheet.
∙When the output tray is closed, you need to remove the ejected sheet or you will get a paper jam when the second sheet is ejected.