Panasonic KX-FC225NZ, KX-FC225AL manual Important information for Australian users

Page 4

Important information (for Australian users)

Instructions to customer

Installation

Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service.

Conditions relating to connection and operation of this Permitted Attachment are contained in Telecommunications General By-Law 220 (5).

You are authorised to install this Permitted Attachment yourself by plugging it into the line socket of any regular telephone. You may connect it in place of your existing telephone or to any spare telephone socket installed in your premises.

To disconnect your existing telephone you must first remove its plug from the line socket. You can then insert the plug of your Permitted Attachment into the socket and use your equipment.

If the plug of your existing telephone cannot be readily removed, you will have to remove the screw securing it. To do this proceed as follows:

1.Loosen screw “A” sufficiently to remove the socket cover. (See Fig. 1.)

2.Remove screw “B” and withdraw the plug. (See Fig. 2.)

3.Replace screw “B”. (See Fig. 3.) Ensure that it screws completely into the socket recess. (If the screw is too long, increase the hole depth or replace the screw with one 5 mm shorter.)

4.Replace socket cover and tighten screw “A”. (See Fig. 4.)

SOCKET PLUG

SCREW “A”

 

SCREW

 

“B”

 

 

Fig. 1

 

Fig. 2

TELEPHONE CORD

)

 

Connect to the PLUG

 

(as shown in Fig. 1.

SCREW “A”

SCREW

 

SOCKET

“B”

 

Fig. 3

 

Fig. 4

If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed.

You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed.

Should the Permitted Attachment not operate when plugged into a socket, it is either faulty or unsuitable for operation with your telephone service. It should be returned to the store where purchased.

Service difficulties

If at any time a fault occurs on your telephone service carry out the following checks before you call for service:

L Disconnect the Permitted Attachment and try using the service with the normal telephone.

L If the telephone service then operates satisfactorily, the fault is in your Permitted Attachment. Leave the Permitted Attachment disconnected and report the fault to its supplier or agent to arrange for repair.

L If when using the telephone the service is still faulty, report the fault to “Service Difficulties and Faults” for attention.

You are required to keep this Permitted Attachment in good working order while it is connected to your telephone service. Its construction or internal circuit must not be modified in any way without permission.

WARNING

This cordless telephone system does not incorporate provision for secrecy of conversations. Appropriately tuned radio equipment and other cordless telephone systems in close proximity may be used by a third party to monitor and possibly interrupt conversations in progress when this system is on radio operation.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents KX-FC225NZ Things you should keep a record Thank you for purchasing a Panasonic fax machineFor your future reference KX-FC225ALFor Australian users Important NoticeImportant information for Australian users Installation Important safety instructionsBattery For Best Performance Location and noiseEnvironment Routine careIntroduction and Installation OverviewMulti-unit Operation Operating additional unitsIncluded accessories Accessory informationAvailable accessories For Users in New Zealand General WarningButton descriptions of the base unit Button descriptions of the cordless handset Display descriptions of the cordless handsetBase unit OverviewCordless handset Ink film Paper tray Paper supportCorrect IncorrectRecording paper Battery installation / replacementCorrectSlant Connections Battery charge Turning the cordless handset power ON/OFFBattery strength Battery icon Power onAdjusting cordless handset volume Adjusting base unit volumeWith the cordless handset Date and timeWith the base unit Your logo Your fax numberSET Recall StopMaking phone calls SP-PHONE RedialMaking a phone call using the phonebook Answering phone callsCordless handset phonebook Storing phonebook itemsChain dial Cordless handset only Base unit phonebookEditing a stored item Erasing a stored itemMaking a call using a one touch dial Key One touch dial Base unit onlyErasing all items Assigning an item to a one touch dial KeyViewing and calling back Caller ID serviceHow Caller ID is displayed Symbols and operations for caller information Editing a caller’s telephone number before calling backErasing caller information Caller ID SP-PHONE Stop FAX StartVoice mail service for Australian users only Storing caller information into the phonebookInto the cordless handset Into the base unitSMS Short Message Service Turning SMS on/offChanging SMS message centre numbers Sending a messageReceiving a message Guide to SMS settings Sending a fax manually SP-PHONE Stop FAX Start RedialSending a fax using Phonebook and one touch dial Document requirementsBroadcast transmission Programming items into the broadcast memoryAdding a new item into the broadcast memory Erasing a stored item from the broadcast memoryUse only as a fax FAX only mode Use mostly as a telephone TEL modeActivating TEL mode Selecting the way to use your fax machineSP-PHONE Stop FAX Start Activating FAX only mode Activating TAM/FAX mode with the cordless handsetChanging the ring count in TAM/FAX mode Receiving a fax automatically Auto answer onActivating the junk fax prohibitor Storing undesired callersUsing with the ring detection feature Memu SETMore copying features Making a copyExample Making 2 copies of a 4-page original document Collated pages Uncollated pagesRecording your greeting message Erasing your recorded greeting messageMIC Erase Greeting Check To check the greeting message Press Greeting CheckUseful features during playback Listening to recorded messagesLeaving a message for others or yourself To play back messagesUsing the answering machine with the cordless handset Direct command operationRecording your greeting message Listening to recorded messagesRemote operation using remote commands Operating from a remote locationProgramming for answering machine Summary of remote operationKey Remote command To turn on the auto answer settingFor voice mail/call minder service subscribers Recording a marker messageBasic features Base unit programmingAdvanced features OFF default Desired resolutionUsing 24-hour time entry To cancel after programming, press Stop then SETLetter 92% default To print the stored document Setting friendly #4686% 72% DarkerTAM/FAX Feature Feature code Selection 100msec. defaultConnecting tone volume cannot be adjusted Work correctly. Consult your PBX supplier for the correctCordless handset features Cordless handset programmingUsing the base unit PIN/repeater Sub-menu Feature default settingChange base unit PIN 0000 . *1 Enter the current 4-digit base unit PIN. *2Display setup Time settingsCall options Registering a cordless handset to a base unit Operating additional unitsIntercom To a cordless handset using the base unit Transferring a call/conferenceCopying phonebook items Answering intercom callsTo the cordless handset using the base unit Copying one phonebook itemTo copy to the base unit, press Copying all the phonebook itemsCharacters available in each character entry mode When the base unit displays the character entry screenCharacter entry Character entry modesWhen writing SMS messages Extended 2 character table OCyrillic character table P Alphabet character table ABCError messages Reports Error messages Display Display Cause & SolutionPlease use genuine Panasonic replacement film Installed paper, and re-install it gentlyTransmission error occurred. Try again Use the overseas transmission mode feature #23 onWhen a function does not work, check here Initial settingsGeneral Problem Cause & Solution Problem Cause & Solution Cordless handset doesCaller’s name and/or Telephone numberFax sending Fax receiving Copying Answering machine SMS KX-FC225AL onlyProblem Cause & Solution E0 is displayed If a power failure occursTo the appropriate service. Consult your service provider When the recording paper has jammed in the unit Recording paper jamsWhen the recording paper was not fed into the unit properly Document jamsDo not use paper products, such as paper towels or tissues Thermal head cleaning Reference lists and reports Base unit only SpecificationsMenu SET ITU-T No Test Chart Recording paper specifications Recording paper sizeRecording paper weight Duplex procedureIndex Broadcast ListJournal Report 31 Page Sales Department Panasonic Australia Pty. Limited Panasonic New Zealand LimitedManufacturer Panasonic Communications Malaysia Sdn. Bhd Global web site

KX-FC225AL, KX-FC225NZ specifications

The Panasonic KX-FC225NZ and KX-FC225AL are advanced multifunction fax machines designed to enhance communication and productivity in both home and office environments. These models combine traditional fax features with modern technology, providing users with a versatile and reliable solution for their documentation needs.

One of the main features of the KX-FC225 series is its ability to send and receive faxes quickly and efficiently. With a transmission speed of up to 14.4 kbps, users can send documents in a matter of seconds, which is essential for busy workplaces where time is of the essence. The machines also include a 100-sheet memory capacity, ensuring that incoming faxes are stored even when the paper runs out.

Another notable characteristic is the integrated telephone system. The KX-FC225NZ and KX-FC225AL come with a built-in speakerphone, allowing users to conduct hands-free calls. This feature is particularly useful for multitasking, enabling users to draft documents or prepare for meetings while engaged in a phone conversation. Additionally, these models are equipped with Caller ID functionality, helping users screen calls effectively.

The KX-FC225 series utilizes thermal transfer printing technology, which guarantees high-quality prints that are sharp and smudge-resistant. This technology contributes to the longevity of the printed documents, making them suitable for storage and archiving. Furthermore, the user-friendly interface, featuring an LCD screen and a simple button layout, makes operation straightforward, even for those less familiar with fax machinery.

In terms of connectivity, both models support various options such as speed dials and group dialing, making it easier to contact multiple recipients simultaneously. The KX-FC225NZ and KX-FC225AL also feature auto document feed capabilities, allowing users to send multipage documents without needing to feed each page individually, significantly streamlining the faxing process.

In addition to these features, the Panasonic KX-FC225 series is designed with energy efficiency in mind. These machines are compliant with ENERGY STAR standards, helping users reduce their environmental impact while also lowering energy costs.

Overall, the Panasonic KX-FC225NZ and KX-FC225AL are reliable, feature-rich fax machines that cater to the diverse needs of both home and office users. With their combination of speed, quality, and advanced functionality, they offer an excellent solution for efficient communication and documentation processes.
Top Page Image Contents