28 | C H A P T E R F O U R |
|
|
Setting Volume Amplify
Please carefully read “Setting the Handset Volume” before you do the following steps:
1Press Function , 1 , 5 .
VOL AMPLIFY:OFF?
SELECT <- -> & SET
2Press or to select VOL AMPLIFY:OFF? if none of the users are
users are
PERMANENT?
SELECT <-
3Press or to select PERMANENT? if all the users are
users are
4Press Set .
5Press Stop to exit.
Setting the Speaker Volume
You can adjust the speaker volume when your fax machine is onhook (after you pressed Hook ), by selecting a speaker volume level.
Press or to adjust the volume level. The display shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again.
Setting the Ring Volume
You can adjust the ring volume when your fax machine is idle. You can select a ring volume level or press until the ring is off.
Press or to adjust the volume level. With each key press, the
fax machine rings so you can hear the current setting and the display shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again.
Memory Storage
In the event of a power failure, all settings in the INITIAL SETUP, SETUP RECEIVE and SET AUTO DIAL functions are stored permanently. You may have to reset the date and time.