LCD messages
The following messages are displayed on the LCD when the fax is performing a function or encounters an error. The error code appears in the activity report (see p.
Message | Cause | Action |
AUTO REDIAL | The fax is waiting to redial the |
| receiving number because the |
| line was busy or the receiving |
| party did not answer when you |
| tried to send the document. |
BUSY/NO SIGNAL | The telephone number you |
| dialled is busy. (#018) |
| The fax number dialled was |
| incorrect. |
| The other party’s fax machine is |
| not working. |
Wait for the fax to automatically redial the number. If you want to cancel automatic redialling, wait until the fax starts dialling the number, and press [Stop]
(see p.
Try sending the document at a later time.
Check the fax number and dial again.
Contact the other party and have them check their fax machine.
The other party is not using a
G3 machine.
The touch tone/rotary pulse setting on your fax is incorrect.
The receiving fax machine did not answer within 55 seconds (after all automatic redialling attempts).
CARTRIDGE JAMMED | The cartridge holder cannot |
| move. This is normally due to a |
| paper jam. |
Contact the other party and ask them to send or receive the document using a G3 machine.
Set your fax to the setting that matches your telephone line (see p.
Contact the receiving party and have them check their fax machine. You can try to send the document using manual sending (see p.
Clear the paper jam or whatever is obstructing the cartridge holder and then press [Stop] and start again. Do not attempt to move the cartridge holder manually.
9
SOLUTIONS TO COMMON
The scanner unit may not be in | Press the document release |
the fully upright position. | button, then gently move the |
| scanner unit to the fully upright |
| position. |