3Com Server manual NetWare, At the console prompt, enter

Page 20

3-2CHAPTER 3: SOFTWARE INSTALLATION

You should know how to use the Novell installation program and have the network information, such as protocols, required for installation. If you need help with network information, see your system administrator.

The NetWare server software must be already installed but not yet running.

NetWare 3.12

Install the LANDR9.EXE and 312PTA.EXE patches from Novell. These patches upgrade the server to ODI 3.3 speciﬁcations. Then follow these steps to install the driver:

1Insert the 3Com diskette in the drive and copy all of the ﬁles from the \NWSERVER\3.12 directory on the diskette to the server hard disk.

2At the DOS prompt, enter this command to start the server software:

server

3At the console prompt, enter: load install

4Select the option to edit the AUTOEXEC.NCF ﬁle.

Add lines to the ﬁle to load the driver and bind a protocol. For example, if C:\SERVER is the directory where you copied ﬁles in step 1 and the protocol is IPX, add these lines:

load c:\server\tif.lan bind ipx tif net = number

where number is the unique IPX internal network number assigned to the network.

5Save the AUTOEXEC.NCF ﬁle.

6Exit to DOS and restart the server.

NetWare 4.1x

Follow these steps to install the driver:

1At the DOS prompt, enter this command to start the server software:

server

2At the console prompt, enter:

load install

Image 20

Contents Part No -1128-000 Published February 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Configuration Figures Text Conventions Installation Requirements TablesLifetime Limited Warranty Asia Italy, Greece, Spain, Portugal, Malta Australia, New Zealand JapanSweden, Finland, Norway Belgium, Netherlands, LuxembourgIcon Description About this GuideConventions Related Documentation Convention DescriptionIntroduction 1Basic TR-in-FE System2Larger-Scale TR-in-FE System Hardware Installation Safety PrecautionsUnpack and inspect the NIC Installation RequirementsInstallation Instructions Remove the computer cover Insert the 3C395 NIC in a PCI slot2Connecting the Cable Turn on the PC and check the NIC LEDsBefore You Install Software Before You Install SoftwarePage Installing the NetWare Server Driver Obtaining the Latest DriversNetWare At the console prompt, enterAt the following prompts, make these selections Installing the Windows NT DriverWindows NT 4CHAPTER 3 Software Installation Color Flashing Steady Off TroubleshootingLEDs Test Description DOS Diagnostic TestsAbout the Conﬁguration and Diagnostic Program Boot the PC under DOS Running Group 1 TestsFrom the Test menu, select Run Tests To start the tests, press EnterRunning the Group 3 Test Changing the Test Setup Getting Help If a Test FailsFurther Testing Symptom TipSymptom Tip Page Configuration Option Description Default Available SettingsSelect options and select settings Changing Conﬁguration SettingsFrom the Install menu, select a NIC as follows Changing the Windows NT Registry To save settings, select OKWhen all changes are complete, exit the program Page Specifications RJ-45 Connector Pin Assignments Figure A-1 shows the RJ-45 connector pin assignmentsWorld Wide Web Site Online Technical Services3Com Bulletin Board Service 3ComFacts Automated Fax Service Access by Analog ModemAccess by Digital Modem 408 6543ComForum on CompuServe Online Service Support from Your Network SupplierLog on to your CompuServe account Press Return to see the 3ComForum main menuSupport from 3Com Regional Sales Office Telephone Number 3Com GmbH 3Com Iberia3Com Latin America 3Com MediterraneoReturning Products for Repair Country Telephone Number Fax NumberIndex NumbersURL B-1 3Com Corporation Limited Warranty FCC Class B Statement FCC Declaration of Conformity