3Com Server manual 4CHAPTER 3 Software Installation

Page 22

3-4CHAPTER 3: SOFTWARE INSTALLATION

6In the Select OEM Option box, select 3Com TIF Server NIC (3C395) for NDIS 3 and click OK.

If you are prompted for network information, contact your system administrator.

7In the Network Settings window, click OK.

8In the Network Settings Change window, click Restart Now.

Windows NT 4.0

Follow these steps to install the driver:

1Start Windows NT and log on.

2In the Control Panel, double-click Network.

3In the Network window, click Adapters.

4In the Adapters tab, click Add.

5In the Select Network Adapters window, click Have Disk.

6Insert the 3Com diskette in the drive, make that the active drive, and click OK.

7In the Select OEM Option box, select 3Com TIF Server NIC (3C395) for NDIS 4 and click OK.

As the installation proceeds, provide network information when prompted. Contact your system administrator for this information.

8In the Network Adapters tab, click Close. Bindings messages appear.

9In the Network Settings Change window, click Yes to restart the computer.

Image 22

Contents Part No -1128-000 Published February 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Configuration Figures Text Conventions Installation Requirements TablesLifetime Limited Warranty Sweden, Finland, Norway Asia Italy, Greece, Spain, Portugal, MaltaAustralia, New Zealand Japan Belgium, Netherlands, LuxembourgConventions About this GuideIcon Description Related Documentation Convention DescriptionIntroduction 1Basic TR-in-FE System2Larger-Scale TR-in-FE System Hardware Installation Safety PrecautionsInstallation Instructions Installation RequirementsUnpack and inspect the NIC Remove the computer cover Insert the 3C395 NIC in a PCI slot2Connecting the Cable Turn on the PC and check the NIC LEDsBefore You Install Software Before You Install SoftwarePage Installing the NetWare Server Driver Obtaining the Latest DriversNetWare At the console prompt, enterWindows NT Installing the Windows NT DriverAt the following prompts, make these selections 4CHAPTER 3 Software Installation LEDs TroubleshootingColor Flashing Steady Off About the Conﬁguration and Diagnostic Program DOS Diagnostic TestsTest Description From the Test menu, select Run Tests Boot the PC under DOSRunning Group 1 Tests To start the tests, press EnterRunning the Group 3 Test Changing the Test Setup Getting Help If a Test FailsFurther Testing Symptom TipSymptom Tip Page Configuration Option Description Default Available SettingsFrom the Install menu, select a NIC as follows Changing Conﬁguration SettingsSelect options and select settings When all changes are complete, exit the program To save settings, select OKChanging the Windows NT Registry Page Specifications RJ-45 Connector Pin Assignments Figure A-1 shows the RJ-45 connector pin assignments3Com Bulletin Board Service Online Technical ServicesWorld Wide Web Site Access by Digital Modem 3ComFacts Automated Fax ServiceAccess by Analog Modem 408 654Log on to your CompuServe account 3ComForum on CompuServe Online ServiceSupport from Your Network Supplier Press Return to see the 3ComForum main menuSupport from 3Com 3Com Latin America Regional Sales Office Telephone Number 3Com GmbH3Com Iberia 3Com MediterraneoReturning Products for Repair Country Telephone Number Fax NumberIndex NumbersURL B-1 3Com Corporation Limited Warranty FCC Class B Statement FCC Declaration of Conformity