Rack Mount Instructions for SL Servers
Rack Setup Suggestions
•Determine the placement of each component in the rack before you install the rails.
•Install the heaviest server components on the bottom of the rack first, and then work up.
Install the Inner Slides
1.Locate the right inner slide, (the slide that will be used on the right side of chassis when facing the front panel of the chassis).
2.Align the four (4) square holes on the right inner slide against the hooks on the right side of the chassis as show below on the left.
3.Securely attach the slide to the chassis with two M4 flat head screws and repeat the steps
Install the Outer Slides
1.Measure the distance from the front rail of the rack to the rear rail of the rack.
2.Attach a short bracket to the rear side of the right outer slide, and a long bracket to the front side of the right outer slide as shown above on the right.
3.Adjust the short and long brackets to the proper distance so that the chassis can snugly fit into the rack.
4.Secure the slides to the cabinet with screws.
5.Repeat steps
8e6 Enterprise Reporter Quick Start Guide | 11 |