Canon RE-350will operate according to the given, Available, RS-232 LED remains on, Will be off

Order				Operations	RE-350's Condition and LED Status
8	Send designated commands to the RE-350				The RE-350will operate according to the given
	for control.				commands. (Refer to Section 2.0)
9	Set the RE-350to [OFF-LINE] Mode.
	In order to put the RE-350in [OFF-LINE]
	Mode, the following two methods will be
	available:
		1. Push the {RS-232} button on			1. The RE-350will send Request Off Line event data to
			the front panel.			the PC and the RS-232 LED will blink.
					2. After the reception of <Accepted> E-response data, the
						RE-350's status shifts to [OFF-LINE] mode and the RS-
						232 LED will turn off. If the RE-350receives <Denied>
						E-response data, the RE-350stays in [ON-LINE] Mode
						and the RS-232 LED remains on.
						If the PC does not respond in one second with E-
						response data, the RE-350will repeat Request Off Line
						event data up to twice and if still no E-response data,
						the RE-350stays in [ON-LINE] Mode and maintains RS-
						232 LED on. (Refer to Section 2.5)
		2. The PC sends the [OFF-LINE]			The RE-350responds with C-response data and it shifts to
			command to the RE-350.		[OFF-LINE] Mode and the RS-232 LED turns off.
10	Turn off the main power on the RE-350.				The main power of the RE-350will be off and every LED
					will be off.

11