Tele Zoom: Constant Speed
•Function:
Moves the zoom lens in the tele direction at a constant speed. This operation will be stopped with the reception of the <Stop Zooming> command or the zoom lens reaches the
•Timing of the
•The parameter of the
•The maximum operation time (msec): 500 millisecond
•Command format:
Header | ID number | Command | Parameter MSH Parameter LSH |
$10
$ 8 *
$ 0 1
$ 0 1
$ 0 0
Note: The speed of the zooming will be constant from the beginning to the end of this operation. This is different from when the {ZOOM TELE} button on the panel is pushed. If the {ZOOM TELE} button is pushed and continues to be pushed for longer than one second, the zooming will increase to a faster speed.
Tele Zoom: Step
•Function:
Moves the zoom lens in the tele direction one step. This operation will be stopped automatically after the zoom lens has stepped.
•Timing of the
•The parameter of the
•The maximum operation time (msec): 2000 millisecond
•Command format:
Header | ID number | Command | Parameter MSH Parameter LSH |
$10
$ 8 *
$ 0 1
$ 0 3
$ 0 0
26