Canon RE-350 Positive/Negative Commands, Set Positive Mode †, $10 $ 3 $ 0, Set Negative Mode †

3.6 Positive/Negative Commands

Set Positive Mode †

•Function:

Sets the video output to normal (positive). (Also, the Auto-White Balance will be adjusted once.)

•Timing of the “C-response Packet” sent to the PC: Right after this setting is done.

•The parameter of the “C-response Packet”: $0000 fixed

•The maximum operation time (msec): 500 millisecond

•Command format:

Header ID number Command Parameter MSH Parameter LSH

$10

$ 8 *

$ 3 8

$ 0 0

$ 0 0

Set Negative Mode †

•Function:

Sets the video output to negative. (Also, the Auto-White Balance will be adjusted once.)

•Timing of the “C-response Packet” sent to the PC: Right after this setting is done.

•The parameter of the “C-response Packet”: $0000 fixed

•The maximum operation time (msec): 500 millisecond

•Command format:

Header ID number Command Parameter MSH Parameter LSH

$10

$ 8 *

$ 38

$ 0 1

$ 0 0

†The RE-350responds in 500 msec with a C-response data packet after the reception of this command, but it will be still working on the AWB adjustment. (The real AWB operation time will be longer than 500 msec.)

36