Canon manual Operational Procedures Overview, Operations RE-350s Condition and LED Status

Page 9

1.3Operational Procedures Overview

1.3.1Procedure for using the Front Panel

Order	Operations		RE-350's Condition and LED Status
1	With the shutter speed
	switch, set the proper
	shutter of the RE-350.

2	Turn on the main power.	1.	The power LED on the RE-350will be turned on
		2.	Automatically the RE-350will be initialized.
		3.	The White Balance will be adjusted automatically and the White balance
			LED will blink while finding a proper white balanced setting. If the RE-
			350 can not find a proper setting, the White Balance LED will be off, if
			setting is found, the LED will be on.
		4.	The RE-350will start to find the point of focus, the Auto Focus LED will
			be blinking. Once the appropriate point of focus is found, the Auto Focus
			LED will be on, if not, the LED will be off.

3	Operate designated	The RE-350will operate according to the condition of the switches.
	switches.

4	Turn off the main power.	The RE-350will be turned off and every LED will be off.

Image 9

Contents RE-350 Control Interface Command Index Operations and Functions Panel DiagramsDescription of the Front and Rear Panel Functions Key FunctionButton Detail Button Control Knob Digital Switches Main power is turned onPower supply SCp180 Operations RE-350s Condition and LED Status Operational Procedures OverviewOperations Available RE-350will operate according to the givenFront panel PC and the RS-232 LED will blink RS-232 LED remains onMode Meaning Adjusting the value of each control knobSetting the center target value for Auto-White Balance Function of RS-232 button LineRequest on LineLineRequest OFF Line Auto-white balance was adjusted successfully Default Setting of Each Function After Power-OnMeaning of Each LED Status StatusPacket Discrimination Code Assignment Control ProtocolID number ParameterControl Command Packet Format PC RE-350 Data Packet ConfigurationResponse Data Packet Format PC RE-350 Event Data Packet Format PC RE-350Flow Pattern 1 Command Communication Flow Pattern Operational Flow ChartCommand Response Flow Pattern 2 Event Packet Flow PatternFlow Pattern 3 Notification Mode Flow Pattern FP Data PacketResponse data Camera Control Commands Table Control Command and Packet TablesLED System Control Commands TableMode error response System error responseTime out error response Response Data Packet TableEvent Description Byte Header ID # Event Data Packet TableParaL Request on lineDenied AcceptedFP Data Packet Table FP data description ByteParaH ParaL Zoom Commands Description Command Data PacketWide Zoom Constant Speed $10 $ 0Tele Zoom Step Tele Zoom Constant SpeedZoom Stop Zoom Access To PositionZoom Request Position Zoom Tele Constant Speed w/ AF † Zoom Wide Constant Speed w/ AF †OP AF Operate Auto Focus Focus Commands$10 $ 1 $ 0 Focus Near Constant SpeedFocus Near Step Focus Far Constant SpeedFunction Focus Stop Focus Far StepWhite Balance Manual Access To White Balance CommandsOP AWB Operate Auto-White Balance $10 $ 2 $ 0Exposure Commands Exposure Manual Access To$10 $ 2A $ 0 Detail Manual Access To Detail CommandsSet Positive Mode † Positive/Negative CommandsSet Negative Mode † $10 $ 3 $ 0Set Color Mode Color/B&W CommandsSet B/W Mode $10 $ 4 $ 0Detailed System Control Commands System Control CommandsSelect Document Video $10 $ 5 $ 0Document Lights Off † Document Lights On †Backlight Off † Backlight On †$10 $ 6 $ 0 LED NormalLED On $10 $ 6 a $ 0 LED Off$10 $ 6 B $ 0 LED BlinkOFF-LINE Mode ON-LINE Mode$10 $ 7 $ 0 Notification Mode Status of Group a Maximum operation time msec 100 millisecond Command formatVideo C/M $10 $ 8 $ 0Input Status of Group BFunction To get the status data of Group B from the RE-350 = onFocus Status of the ButtonsInput RS-232 Auto BacklightStatus of WB control knob Status of EXP control knobParameter of the C-response Packet MSH $00 fixed Status of Detail control knob Status of AWB resultFunction Gets the position data of the Detail control knob Name of the Equipment Version of ROMParameter of the C-response Packet $10 $F F $ 0 Set to Special Mode$10 $F F $ F F Set to Service ModeRS-232C Control Cable Pin Assignment Control Cable Pin AssignmentsRE-350 RE-350 Control Cable Pin Assignments Pin Dsub RS-232CPage RTS/CTS Flow Control Timing Chart Timing ChartsCommand Mark Duration period Min Max 300ms 200ms 10ms T4-T2Mark Duration period Min Max RTS flow control timing chart44ms 300ms 58ms 300ms 1000ms 200msAppendix a Disk Information RE-350 Software Developers Disk InstallationRE-350 SDK File Definitions RE-350 Demo Application \APPRE-350 16bit Sample Code \16BITSDK Execute an RE-350commandInitialize communications with the RE-350 Close communications with the RE-350RE-350 32bit Sample Code \32BITSDK Execute an RE-350 command

Related manuals

Manual 4 pages 50.01 Kb

1.3Operational Procedures Overview

Operations

RE-350's Condition and LED Status

Automatically the RE-350will be initialized.

setting is found, the LED will be on.