Safety Notes
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.Changes or modifications not expressly approved by Emerson could void the user's authority to operate the equipment. Board products are tested in a representative system to show compliance with the above mentioned requirements. A proper installation in a compliant system will maintain the required performance.Use only shielded cables when connecting peripherals to assure that appropriate radio frequency emissions compliance is maintained.
Operation
Damage of the RTM
High humidity and condensation on the RTM surface causes short circuits.
Do not operate the RTM outside the specified environmental limits. Make sure the RTM is completely dry and there is no moisture on any surface before applying power.
Do not operate the RTM below
Installation
Damage of the RTM and Additional Devices and Modules
Incorrect installation or removal of additional devices or modules may damage the RTM or the additional devices or modules.
Before installing or removing additional devices or modules, read the respective documentation.
Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the RTM can damage circuits or shorten their life.
Before touching the RTM or electronic components, make sure that your are working in an
Damage of the RTM
Incorrect installation of the RTM can cause damage of the RTM.
Only use handles when installing/removing the RTM to avoid damage/deformation to the face plate and/or PCB.
14 |