Emerson RTM-ATCA-F120-OPT manual Power Requirements, Requirement Operating Non-Operating

Hardware Preparation and Installation

Table 2-1 Environmental Requirements

Requirement	Operating	Non-Operating
Temperature	0ºC to +40ºC (normal operation) according	-40ºC to +85ºC
	to NEBS Standard GR-63-CORE
	0ºC to +55ºC (exceptional operation)
	according to NEBS Standard GR-63-CORE
Temp. Change	+/- 0.25ºC/min according to NEBS	+/- 0.25ºC/min
	Standard GR-63-CORE
Rel. Humidity	5% to 95% non-condensing according to	5% to 95% non-condensing
	Emerson-internal environmental	according to Emerson-internal
	requirements	environmental requirements
Vibration	0.1g from 5 to 100 Hz and back to 5 Hz at	5-20 Hz @ 0.01 g2/Hz
	a rate of 0.1 octave/minute	20-200 Hz @ -3.0 dB/octave
		Random 5-20 Hz @ 1 m2/Sec3
		Random 20-200 Hz @ -3 m/Sec2
Shock	Half-sine, 11 m/Sec, 30mSec/sec2	Blade level packaging
		Half-sine, 6 mSec at 180 m/Sec2
Free Fall		1,200 mm/all edges and corners
		1.0m (Packaged) per ETSI 300
		019-2-2 (Blade level packaging)
		100mm (unpackaged) per GR-63-
		CORE

2.3.2Power Requirements

The RTM has a typical power dissipation of 22W, and a maximum power dissipation of 30W.

RTM-ATCA-F120-OPT Installation and Use (6806800G29C) 27